RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 652 views
Helicopter
e-
Elec-Helicopters New or Limited Activity
Zoom › Tail Wagging. Any Ideas????
06-05-2004 08:46 AM  13 years agoPost 1
Peter G

rrApprentice

Runcorn, Cheshire, UK

My Posts: All  Forum  Topic

I have a CSM 200 LW and mounted it on the Right hand side of the frames. I first screwed a scrap piece of carbon onto the frames, underneath the main gear, then using the supplied foam,mounted the gyro.
My problem is that I cannot stop the Tail Waggging. I have reduced the Gain, but it still wags. I am using the protech servos all round, and still have not replaced the flimsy Tail wire. I have however moved the Tail servo, to a carbon plate on the Tail Boom.
I am interested, in other peoples experiences with the CSM 200, and what Tail Servo to use.
Is the Protech servo too slow for the CSM 200 to work at its optimum?

Thanks

Peter G

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-07-2004 01:54 PM  13 years agoPost 2
bubblehead

rrApprentice

Elburn, IL

My Posts: All  Forum  Topic

I'd suggest replacing the tail pushrod with a carbon fiber pushrod, and make sure everything in the tail is working freely but without slop. I am using the CSM 200 gyro and it works fine but whenever I find the tail starting to wag, it's usually an indicator that something isn't sliding freely.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 652 views
Helicopter
e-
Elec-Helicopters New or Limited Activity
Zoom › Tail Wagging. Any Ideas????
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, December 14 - 8:10 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online