RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 446 views
Helicopter
e-
Elec-Helicopters New or Limited Activity
MS Composit › Common tail rotor hub problem - solution
06-04-2004 11:19 PM  13 years agoPost 1
rdalcanto

rrKey Veteran

Salt Lake City, UT

My Posts: All  Forum  Topic

When I was building my Hornet 2 tail hub, I noticed that one of the M2x8 screws didn't go in very far on one side (4 turns vs 7 turns on the other). Dennis at Deeteeenterprises was kind enough to send my a new one ASAP free of charge, but the new one was exactly the same. I talked to Joe at MSComposite, who said to take one of the black main blade bolts, and using an allen wrench, screw the bolt all the way down a bunch of times to get the glue out from when the hub was built at the factory. That trick worked very well. I am now able to get both screws in 7 turns with very good motion of my tail grips.

Rick

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-04-2004 11:57 PM  13 years agoPost 2
Dennis (RIP)

rrApprentice

Oregon

My Posts: All  Forum  Topic

Thanks for passing that on Rick.

........L8tr.............Dennis

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 446 views
Helicopter
e-
Elec-Helicopters New or Limited Activity
MS Composit › Common tail rotor hub problem - solution
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, December 13 - 12:45 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online