RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 851 views
Helicopter
e-
JR-Heli
Other › Voyager E Speed controler glitch
06-04-2004 07:20 PM  13 years agoPost 1
Imperio

rrApprentice

tecumseh okla 7487 ph405-598-6267

My Posts: All  Forum  Topic

Hi I had a bit of a glitch on my voyager the motor would sudenly start for a split second and scare the crap out of me and I found the problem was I had zip tyed the antena wire to one of the gyro lead's and it caused this kind of a glitch only in the speed controller though any way aparently one cannot in any fashion on this aplication have the antena wire's near any thing once I removed the zip ty's and zip tyed it to the frame the problem went away maybe this will help someone else by the way it's totally stock 8 cell 3300's NIMH for power 10 minutes just hovering in no wind or the house where it's calm and about 8 minute's if it's windy and your negotiating it

PM  EMAIL  GALLERY  Attn:RR  Quote
06-12-2004 12:07 PM  13 years agoPost 2
Lock-Tite

rrVeteran

Quebec, Canada

My Posts: All  Forum  Topic

I had the same problem. Keep the antenna and the gyro wires aways from others and from themselves.

Frank
Dont forget to bring a clean pair of shorts when flying 3D ;)

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-14-2004 07:52 AM  13 years agoPost 3
VENTUREMAN

rrNovice

Akron,OH

My Posts: All  Forum  Topic

Just make sure you don't put the gyro in the spot that the instructions tell you to or the rudder servo will go nuts. Put it on the front where the receiver goes. That speed control makes alot of rf noise that will make things go squirrely on you.

PM  EMAIL  Attn:RR  Quote
06-14-2004 02:49 PM  13 years agoPost 4
DeanM

rrApprentice

Oklahoma City, OK

My Posts: All  Forum  Topic

Another good location for the gyro is behind the mainshaft on top of the frames. Make a small platform to fit it and CA the platform to the level area behind the mainshaft. My 401 works fine there.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 851 views
Helicopter
e-
JR-Heli
Other › Voyager E Speed controler glitch
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, December 12 - 2:55 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online