RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 655 views
HelicopterThunder TigerOther › Raptor 60 with C-Spec
06-04-2004 07:00 PM  13 years agoPost 1
pcmpete

rrApprentice

Phoenix,AZ

My Posts: All  Forum  Topic

I have read alot about people having trouble fitting C-Spec into a Raptor 60, with cutting fan shrouds and sevro trays. What is the part numbers of the shroud and tray required for this installation.
Plus is the best gearing for this setup (ratio & number of teeth required) i will be keeping the 680 blades and short 60 boom.

Thanking you in advance

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2004 07:15 PM  13 years agoPost 2
Andreas

rrVeteran

Sweden

My Posts: All  Forum  Topic

Hi.
You'll need these parts:
Fan casing (PV0412)
Servo frame (PV0413)

I have 8.27 on my Rappy with the C Spec PS but i have the long boom and 700mm blades. It works great.

Cheers Andreas

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2004 07:38 PM  13 years agoPost 3
jameswill4

rrVeteran

Pineville KY

My Posts: All  Forum  Topic

I have thought about doing the same thing Can you take a rappy 60 and put a c spec in it and run the 680 blades and the stock gearing and the short boom or do you need to change the gearing?

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2004 12:05 AM  13 years agoPost 4
Brian W.

rrNovice

Nor Cal

My Posts: All  Forum  Topic

I flew the 60 with a C-Spec and it worked great for me. I added the following:

91 Tooth main gear (for 8.27 ratio)
90 size clutch/bell
80 Duro Dampeners

Everything else was all stock. I dremeled out the servo frame and shroud to fit the 91 and it worked just fine. I ran 690mm Mah blades.

Brian

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2004 04:12 AM  13 years agoPost 5
nappyroots2182

rrElite Veteran

Moline, il

My Posts: All  Forum  Topic

i also have a rappy 60 with 680 carbons and c-spec PS. have 8.27 gear and 90 clutch. flys great. will need the fan shroud and servo frame as if you cut out the old stuff then you will have no cooling and will over heat. trust me ive been there.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2004 06:17 AM  13 years agoPost 6
hobbyboy

rrApprentice

Puyallup,WA

My Posts: All  Forum  Topic

R-60

You can save yourself a lot of trouble and just put a OS 60SXH head on your C-Spec and it just bolts in. I just did the conversion but prefer the OS 70. I have a C-SPEC , CMP11 and 11 tooth pinion with two gallons on it if your looking. Bob

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 655 views
HelicopterThunder TigerOther › Raptor 60 with C-Spec
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, December 17 - 9:39 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online