RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 1930 views
Helicopter
e-
Mikado
Other › Anyone have a Logo 14 Flying yet?
06-04-2004 03:13 AM  13 years agoPost 1
lawrenmd

rrApprentice

Orlando FL.

My Posts: All  Forum  Topic

I am interested in some feed back on this machine, anyone have one flying yet, besides Gary Wright?

Dave

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2004 02:31 PM  13 years agoPost 2
Heli88

rrKey Veteran

Clarkston, MI

My Posts: All  Forum  Topic

I'm going to go to SEFF on June 16th...GW is supposed to be there with the 14. I can't wait to see it...

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-04-2004 04:01 PM  13 years agoPost 3
gwright

rrVeteran

Champaign Il

My Posts: All  Forum  Topic

I had a minor accident with the 14,.. a dumb-thumb incident in an inverted auto(my fault, not the heli). I'm awaiting a right mainframe,.. so unless it gets here in the next week and a half I won't have it at SEFF.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2004 04:45 PM  13 years agoPost 4
Heli88

rrKey Veteran

Clarkston, MI

My Posts: All  Forum  Topic

Too bad about the Logo...

Gary, Thanks for posting...I'm not going to drive 800 miles if the 14 won't be there. Is it OK if I call you at GWMP a couple of days before to see if you will have it flying?

Thanks...Hans

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-15-2004 03:05 PM  13 years agoPost 5
Heli88

rrKey Veteran

Clarkston, MI

My Posts: All  Forum  Topic

Mikado says that the Logo 14 will ship in two weeks!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-20-2004 05:09 AM  13 years agoPost 6
pblgml

rrApprentice

Utah

My Posts: All  Forum  Topic

Im Flying

What a smooth ship

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-30-2004 05:14 AM  13 years agoPost 7
Lost Horizon

rrNovice

Victoria BC

My Posts: All  Forum  Topic

I've had mine running for a bit now...

I'm using "The Box" on a C50-13XL and 9s2p TP B2 4200's in 3s2p chunks and Century 570mm Tapered blades. The Lipo's fit perfectly in the tray, and with the motor forward, the C of G is right under the mast with the 18 Lipos, no need to push anything forward...

I started out with a 13T pinion, but the head speed was 2330, too high for my liking. On 12T (on the 138 and the box) the head speed is 2000. Power is basically unlimited, all that the 570's can absorb and then some. It's very hot with this setup and weighs just over 6 pounds FW. Probably a boxed C50-14XL on 9s2p would be more than enough for most, but for the dragster out there, the 13XL is mean..

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
08-31-2004 12:10 AM  13 years agoPost 8
cub2000

rrVeteran

Massachusetts

My Posts: All  Forum  Topic

Anybody have a picture of a Logo 14 side by side with Logo 10?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-08-2005 02:06 PM  12 years agoPost 9
THX1138

rrElite Veteran

Camp Bondsteel, Kosovo

My Posts: All  Forum  Topic

Lost horizon

What esc are you running? what kind of flight times are you getting? TP has available a single pack 10s2p, do you think this would work good with your set-up?

Lou

PM  EMAIL  GALLERY  Attn:RR  Quote
02-08-2005 06:58 PM  12 years agoPost 10
Lost Horizon

rrNovice

Victoria BC

My Posts: All  Forum  Topic

I just got one of the new 10s2p packs and will try it out
as soon as I have time. I'm gonna go to an 11T pinion
and try one of the "NEU" 1.5's at about 48,000 rpm.
That should make it interesting.

My ESC is a Schulze 32.55. Flight times (3D) are
8-9 minutes.

Also, as asked above, here is a pic of an L10Extreme
(admittedly, not you average Logo 10) and an L14 side by side..

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
WATCH
 1 page 1930 views
Helicopter
e-
Mikado
Other › Anyone have a Logo 14 Flying yet?
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, December 12 - 12:26 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online