RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 595 views
06-03-2004 04:22 AM  13 years agoPost 1
DAVE62278

rrApprentice

Ridgetown, Ontario, Canada

My Posts: All  Forum  Topic

In G2 with gyro set to HH, the tail doesn't hold anywhere as good as my real EVO with 401/9253 using 8UHFS. I'm using my tx with same program I fly with. It's the Impala I'm trying edit but not having much luck.
Could someone please help with a suggestion or a HH gyro set-up that works.
Thanks,
Dave

PM  EMAIL  Attn:RR  Quote
06-03-2004 04:06 PM  13 years agoPost 2
rcheliace

rrVeteran

Freehold, N.J. United States

My Posts: All  Forum  Topic

If it's the EVO that your flying in real life then try the EVO from my site . It is very close to the set up on the one I had. It is based on the sundog wich I think is much closer to the EVO than the impala. It also has the EVO colorscheme, so that will help with the visual aspect. If you just want settings then you could try speeding up the tail, or making the blades bigger. You could also set the gain a little higher then back it off a bit if you get any tail wag. These are my EVO's setting for tail and gyro

tail

diamiter 11.00
cord 1.50
main to tail ratio 6.50
air foil naca 0011

gyro
range 45
HH gain 70
mix 100
rate gain 40
delay 4000
piro rate 540

hope this helps

Rob

Rob
rcheliace.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-04-2004 04:20 AM  13 years agoPost 3
DAVE62278

rrApprentice

Ridgetown, Ontario, Canada

My Posts: All  Forum  Topic

Rob,
Thanks the reply and settings. Applied them to the Impala and when holding a hover, heli rotates slowly counter-clockwise and when I switch to non-HH, heli rotates clockwise but a little faster. I'm getting a little frustrated, my evo 30 wasn't half as much trouble getting trimme out.

Very impressive site you have, thanks for the link. With only G2(no add-ons) when downloading a heli, would the paint schemes work.

Dave

PM  EMAIL  Attn:RR  Quote
06-04-2004 03:14 PM  13 years agoPost 4
rcheliace

rrVeteran

Freehold, N.J. United States

My Posts: All  Forum  Topic

To fix the tail drifting look in the tail rotor settings. You will see the CW and CCW settings. This is to hold the tail in a hover from drifting. If it drifts CW then raise the CCW setting. If it drifts CCW then raise the CW setting. The colorschemes will work on the helis as long as you have the add-on for the heli it's for. If you only have the RF G2 disc with no add-ons then only the helis based on the foiler, sundog, and impala will work. Try out the EVO it's based on the sundog. It might be better than trying to get the impala set up.

Rob

Rob
rcheliace.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 595 views
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, December 17 - 8:18 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online