RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 444 views
HelicopterHIROBOOther › 601 set up x-spec
06-02-2004 05:19 PM  13 years agoPost 1
crashnomore

rrApprentice

mchenry il usa

My Posts: All  Forum  Topic

sorry i need my hand held on this one instead of torching the servo trying to figure it out ill just ask this is my first 601 im looking for some one with a good 601 set up that works well and is willing to post it i run a 10x gain is set up on aux.2 i can keep tinkering with it till i tear it up or get it right it has so many adjustable paramaters its easy to tune yourself right out of the ballpark !!!! i need amp settings ball link placement if someone has the time to post i would greatly appricate it
thanks chet

and running a servo ext. i was told to not do it but had no choice is there a better place to mount the amp or should i not worry ?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-02-2004 09:15 PM  13 years agoPost 2
mrNoodles

rrProfessor

Borlänge, Sweden

My Posts: All  Forum  Topic

Gain: 35-37% (read on amp display!)
Servoarm length: 15mm
F3c mode.

Im also using a servo extension, without problems so far.

Check out http://www.jkheli.com for Jasons setup tips.

/Fredrik
'Hm now I just have to find out where to connect the GV1 sensor to the Jazz80 ESC.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-02-2004 09:38 PM  13 years agoPost 3
AndyH

rrKey Veteran

Rockledge, FL

My Posts: All  Forum  Topic

Ive got my gain at 31
and same arm as MR Noodles and the extension doesn't seem to be hurting anything yet!

Check out the setup and tips part -
JKheli.com

PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2004 10:14 PM  13 years agoPost 4
snookfishnjoe

rrVeteran

manatee county florida

My Posts: All  Forum  Topic

Is the atv setting the same on the 601 as the 401. On the 401 the atv represents the speed, does it do that for the 601?

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 444 views
HelicopterHIROBOOther › 601 set up x-spec
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, December 11 - 5:57 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online