RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 404 views
HelicopterThunder TigerOther › Tail rotor setup gy401/9253
05-01-2004 02:37 AM  13 years agoPost 1
austinheli

rrNovice

Austin,TX

My Posts: All  Forum  Topic

Hey I have one question. I have centered the tail rotor at 4.5MM from the tail casing per michael and raptortechnique. Im very sure he is right on the money and I will probably answer my own question... just looking for some backup. In centering the tail rotor, the tail pitch is a bit off center. im pretty sure that should be like that to counter the main rotor. am I correct??

thanks
Jason

PM  EMAIL  Attn:RR  Quote
05-01-2004 03:11 AM  13 years agoPost 2
tailrotordave

rrVeteran

Burbank, Ca

My Posts: All  Forum  Topic

Yes and 4.5mm is the correct number. I made a small wooden gauge (a piece of paint stir stick with a "V" ground into the end) that is exactly 4.5mm thick and place that on the tail rotor shaft, move the pitch slider up against it and tighten the setscrews on the pushrod. Works great.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 404 views
HelicopterThunder TigerOther › Tail rotor setup gy401/9253
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, December 15 - 12:46 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online