RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 813 views
Helicopter
e-
Mikado
Other › MaxCim MaxN32-13Y any good for a Logo 10?
04-30-2004 10:46 PM  13 years agoPost 1
Grant_Smith

rrNovice

Bracknell, UK

My Posts: All  Forum  Topic

I am looking to get a Logo 10 eventually with a 'proper' Hacker motor. In the mean time however, I have a MaxCim MaxN32-13Y motor (http://www.maxcim.com/technical.html) spare from a currently unused plank. Can anyone advise whether this would be a usable motor in a Logo 10, at least until I can afford a Hacker/Schulze combo?

Thanks

Grant

PM  EMAIL  Attn:RR  Quote
05-01-2004 04:40 AM  13 years agoPost 2
Saint728

rrProfessor

Honolulu, Hawaii

My Posts: All  Forum  Topic

I doubt that motor will work? I looked at the motor rating from the link you provided and it said that the motor puts out 1420 (rpm/Volt). That's not nearly enough to get to the proper head speed you will need to fly. Most motors used fr the Logo 10 have about 1800-2100 (rpm/Volt). You might be able to get that motor to work if you put a really big pinion gear on it, but that might just over heat the motor and run down the batteries trying to spin it up?

Take Care,
Cheers, Patrick

Check the hotties in my Gallery
http://rc.runryder.com/helicopter/gallery/9019/?all=photo

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-01-2004 12:00 PM  13 years agoPost 3
rscamp

rrVeteran

Ontario, Canada

My Posts: All  Forum  Topic

Yes but...

Use a higher voltage and 1420RPM/Volt is just fine. 6s Lipos look good...

Rob

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 813 views
Helicopter
e-
Mikado
Other › MaxCim MaxN32-13Y any good for a Logo 10?
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, December 11 - 2:59 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online