RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 447 views
HelicopterRadio - Servo - Gyro - Gov - Batt › G6000T lighting sequence
04-30-2004 10:59 AM  13 years agoPost 1
Tom Carne

rrVeteran

Western Australia

My Posts: All  Forum  Topic

I just wanted to check that my lighting sequence on my G6000T matches someone elses cause it doesn't match those given in the instructions.

Travel
adjust
100 Green Green Green
75 Green Green Red
50 Green Red Green
25 Green Red Red
0 Red Red Red

The instructions say @50% travel adjust it should be Green Green Red.
I have also noticed it seems very easy to reset this gyro with a hardish landing.

PM  EMAIL  Attn:RR  Quote
04-30-2004 12:36 PM  13 years agoPost 2
Saint728

rrProfessor

Honolulu, Hawaii

My Posts: All  Forum  Topic

I use to have one, but I could never figure out how to use it, so I sold it and bought a GY601 instead. Have you tried to look at the new G6000T set-up guide? Here is the link. http://www.macgregor.co.uk/radio/docs/g6000Setup.pdf They also have a supplementary set-up instructions. Here is the link to that. http://www.macgregor.co.uk/radio/docs/g6000.pdf Good luck in seting yours up.

Take Care,
Cheers, Patrick

Check the hotties in my Gallery
http://rc.runryder.com/helicopter/gallery/9019/?all=photo

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-01-2004 12:53 PM  13 years agoPost 3
Tom Carne

rrVeteran

Western Australia

My Posts: All  Forum  Topic

I tried selling mine as well. Should have taken what was offered. When set up they do perform very well though. There is deefinately some experience needed with them to get the best out of it. For plug and play the 601 takes beating. Have looked up McGregors site. Pretty much same instructions I have now. Its really a matter of patience to get the best from the 6000T. It does hold very well when you get it right.

PM  EMAIL  Attn:RR  Quote
05-01-2004 01:00 PM  13 years agoPost 4
Reesy

rrKey Veteran

In the doghouse ... Nottingham UK

My Posts: All  Forum  Topic

Hi Tom
No mine does something like that the 25% and 50% lights are oppposite to what I read in the manual and no one ever came back on it..
I gave up worrying about it as it seems to work OK

Paul

PM  EMAIL  GALLERY  Attn:RR  Quote
05-01-2004 04:29 PM  13 years agoPost 5
9387ASH

rrElite Veteran

UK

My Posts: All  Forum  Topic

If you look at the lights and do a direct comparison to the "manual", you will notice that they are wrong.

However, if you look at the labels on the 6000 and compare them against the instructions, then they are right. The writers of the instructions didnt follow the same sequence as on the 6000 itself.

Hope that makes sense !!

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 447 views
HelicopterRadio - Servo - Gyro - Gov - Batt › G6000T lighting sequence
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, December 15 - 6:06 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online