RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 468 views
04-27-2004 03:15 PM  13 years agoPost 1
Dixie

rrApprentice

Somerset, England

My Posts: All  Forum  Topic

I have a CSM 560 V1 and 8700G servo, I have heard alot of bad press about this gyro, but it seems ok for my type of flying. General loops, rolls ,stall turns and inverted seem ok. I am going to change some of the parameters, I am going to put the decay time down to "0". Any other suggestions?? I cannot really be arsed with taking it out and sending back to CSM for a V3 upgrade as I do not want to be without it for a few weeks. I am flying it in a Robbe Conquest with OS 50 and Zimmerman.

Any suggestions will be of help.

PM  EMAIL  Attn:RR  Quote
04-27-2004 04:54 PM  13 years agoPost 2
G.Man

rrProfessor

Bristol

My Posts: All  Forum  Topic

http://runryder.com/helicopter/gall...tup_for_r50.doc


Don't Email me as I wont reply - PM Only (spam countermeasures)

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2004 05:38 PM  13 years agoPost 3
TOSH

rrElite Veteran

UK.Peterborough

My Posts: All  Forum  Topic

Galifrey

Would that work for the 560 micro too or should l leave it alone.lts going in a r50 v2 thats been droped off a few doors up cus we wern`t in.Frogmella and Elvis are getting fed up walking there and back every 5 minutes cus now he`s not in.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-28-2004 01:09 AM  13 years agoPost 4
staraero1

rrKey Veteran

Atlantic City, New Jersey

My Posts: All  Forum  Topic

The version 1 or 2 software works very well in the original 560's. You will have no trouble with it at all when setup up properly and the helicopter has no vibration problems. I am still running a couple of V1 units and except for the time to boot up when first turned on, the units are fine. It takes about 10 seconds to let the versions 1's boot up and get the sensors stable. After that have at it. The 0 decay thing is a good idea in both rate and heading hold modes. Russ Deaken's setup is very good to use as well for specific helicopters.

Staraero1

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 468 views
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, December 18 - 11:06 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online