RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 558 views
HelicopterBlades and Night Flying › mah 710 g2 5mm bolt hole
04-27-2004 01:08 PM  13 years agoPost 1
dane 3d

rrNovice

brisbane australia

My Posts: All  Forum  Topic

can i drill out a set of mah 710g2 to a 5mm bolt size if so how would i go about doing this thanks

PM  EMAIL  Attn:RR  Quote
04-27-2004 04:19 PM  13 years agoPost 2
nytracon

rrApprentice

Scotchtown, NY

My Posts: All  Forum  Topic

Just go slow and straight. The brass is thick enough to drill out.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2004 08:01 PM  13 years agoPost 3
Skyline

rrApprentice

Walnut, CA - USA

My Posts: All  Forum  Topic

Make sure you use some lubricant while you drill the bushing; this will help cool the bushing down and lubricate the drill. You can use wd-40 and just spray a little and drill a little at a time, just keep repeating untill its drilled all the way through. Use 3 different size drill bits though.

Another alternative is to buy the MAH G2 blades with 5mm bushings. I know MAH have them already, I already got a set with 5mm bushings and I like them alot. No more drilling for me.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 558 views
HelicopterBlades and Night Flying › mah 710 g2 5mm bolt hole
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, December 12 - 4:09 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online