RunRyder RC Community and Forums
Aircraft
›› Helicopter
›››
e-
Blade
(https://rc.runryder.com/f100p1/)
››››
Blade 300
Blade 300 series
(https://rc.runryder.com/t786999p1/)
Posted by critter243 on 04-13-2015 12:35 AM:
I'm looking at the blade 300 helis and trying to figure out the difference between the 300x and the 300CFX. I'm fairly new to helis.....is either of these a decent heli ?
Posted by R/C Speed Nut on 04-13-2015 01:10 AM:
The difference is that the CFX has carbon fiber side frames and aluminum bearing blocks, with optimized servo geometry.


Mike

Funky Chicken?!!..........I thought this was how you do a piro flip!!

Posted by Flying Foot Doc on 11-02-2016 04:23 AM:
FWIW, I use my 300 as one of my most regular fliers. Makes some funky noises, but just keeps on ticking...

Inverted IS more fun!

Posted by mgfiest on 11-02-2016 11:29 AM:
I have a 300x, parts are less expensive than 300cpx but you can used cpx parts on a 300x. If you are really looking at this... make sure you have access to parts. Both machines are no longer being made and parts will soon be limited. Good luck
Fri, Jun 22 - 5:11 am © 2000-2018 RunRyder