RunRyder RC Community and Forums
Aircraft
›› Helicopter
››› Thunder Tiger (https://rc.runryder.com/f33p1/)
›››› How do you take the bearings out? (https://rc.runryder.com/t103693p1/)
Posted by DjLock on 04-29-2004 01:27 AM:
Before I do anything and damage material, how do you get the bearing out of the flybar seesaw? I plan on doing a color strip on the headbutton one I got and I have no idea how to get th ebearings out...

Thanks,

Eric
Posted by donlynn on 04-29-2004 02:49 AM:
Gidday

attempt one
Heat in oven for 20 minutes at 150 C then remove with rag and pipe pliers and rap on a block of wood

attempt two
use a long pin punch ensuring you are on the center race and not the shield and drive out gently from the opposite end while sitting on a appropriate sized socket.

Regards Don
Sat, Jun 23 - 12:10 am © 2000-2018 RunRyder