Back to RunRyder RC
Thanks to all who attended and/or sponsored our 1st Annual Winter Heli Fly - In
Welcome to John's Place
TREX Swashplate Leveling (Setup) Tool
Leveling tool in place.
Leveling tool Key Ring and Ribbon.
Dial Calipers measuring TREX Linkage.
These are some pictures of a TREX Swashplate Leveling (Setup) tool I made for a friend of mine.
He is now able to setup his helicopter after a crash to the same specifcations of his original setup.
The Gathering #2
September 4-5, 2004
The Gathering # 2 September 4-5, 2004
The Event was well attended
Great flying site with plenty of flying stations
Bob StinsonThe Really Big Hitter
Club Volunteers Thanks for the help
Burgers on the barbie Free to all the pilots
Free Rotory Magazines
Exchange of ideas
Mike Mas talks helicopters
Beautiful scale ship
Everyone had a great time
Is this a great event or what.
The food was great
They had small helicopters too
Nostalgia Helicopter by Steve Portgz
More flying fun
A little rest between flights
Plenty of talent
Almost ready for another flight
Alan Szabo Sr. samples some of the provisions
Thanks to all the volunteers
The Free food and drinks were a big hit
The local talent was impressive
Plenty of flying
Alan Szabo Jr. prepares for another demo flight
Safety was #1
We are next
Bob and one of his many friends
The Szabo boys return from a demo flight
Mike Mas taking pictures for Rotory Magazine
OC BobEvent Director
Bob and Friend
The Setup Clinic was a big hit
Jeff Hilderbant provides expert help for the newbies
A gathering at the gathering
Turbine in action
Steve PoretzDubro Whilrly Bird
Angelo and Bob Ready the Heliboy for flight
Bob heads to the flightline
Heli-Boy in action
ChampionsPast and Present
Danny it's your turn to fly the Heli-Boy
The Szabo's watch as OC Bob loops & rolls the ole Heli-Boy
Hey Bob, this is pretty smooth
Everyone had a ton-of-fun
Hard working volunteers take a well deserved rest
Alan Szabo Sr. drew the tickets for the prizes
The lucky winner of a Raptor 50 Donated by Bob Pinto
He also won a Futaba 9C Radio system which was also donated by Bob Pinto
"Fred" Proud member of the OC Bob Flying Team
Event Details: Saturday and Sunday were perfect days for flying and the pilots had a great time. The food and drink was GREAT and was supplied at no-charge thanks to our most gracious host Bob Pinto. We had pilots that came to the Gathering # 2 from all over the country. We had open flying all day Saturday and Sunday with a few Demonstation flights by the Szabo Boys and others. They even had a demonstration flight of a turbine R/C scale helicopter. Bob was very fortunate in that he had extremely good support from premiere vendors that donated items for the event contestants. Hopefully more vendors will step forward and donate to this worthy event for the Gathering # 3. Additionally, Bob Pinto donated a Raptor 50 with a Futaba 9C radio system for the Grand Prize. Bob also had a hospitality suite in Atlantic City for all the contestants. Thanks to everyone that attended. The Atlantic County Skyblazers really enjoyed having you attend their Event. They and Bob hope to see you next year.
My Other Toy
My 1966 Ford Cobra Replica
Cobra at Daytona Beach
351 Cleveland In Process
Most Powerful Trailer In The World
New Retrofit PV0383 One Way Clutch for Raptor 60
PV0030 Tail Rotor Drive Shaft For Use with Modified Timing Pulley
Thanks Al for the Photo
Raptor 30/50 Custom Gear Hub
Red and Gray gears with countersunk screws installed. Also, Gear Hub with stabiizer screws.
Red gear with Hub installed.
Side View Gear Hub
Gear Hub assembly installed on main shaft.
This is the hub I made to replace the OEM white gear that is shipped with the Raptor 30/50 V2 helicopters. Unlike the OEM gear this unit has "No Drag" and rotates freely. The red gear utilized is from the Raptor 30/50 V1 kit. The countersunk screws are 3mm X .5 and 10mm in length which are cut to fit. The same screws are used in both the red and gray gears. The stabilizer screws are 3mm X .5 socket head cap screws cut to length.
Raptor 30/50 Custom Tooling
Swashplate Leveling Tool Setup Instructions
Add to clipboard by clicking under thumbnails
Thursday, January 21 - 7:51 am - Copyright © 2000-2021 RunRyder
Jump to subscribed forum