MRC-Hirobo
rrAdvertiser
Location: Edison, NJ
My Posts This: Topic Forum | EvoHi JW Burns,
The "slop" is normal and has no effect on the way it flies. The slop comes from the single radial and single thrust bearing arrangement. We used a tight blade arrangement, two radial bearings, and the difference was that the bearings actually wore out quicker. It seems the thrust bearing makes it last longer.
The Freya one is a two radial and single thrust and is tighter yes. You can put that on the Sceadu very easily by getting the following parts:
0404662 Blade grips
2500070 Bearings 3x9x3
0414164 tail housing
2506003 washers 3x6x.5t
2532028 2x 8 screws
The tail performance will increase as the tail disk will no be bigger. Note the maximum recommended tail blade is 90mm with this arrangement. I have not used 95's but the math held for 90's. Hirobo is using this arrangement on the new Option kit Sceadus but using the stock 87's "Ginsu's"
Jeff  |
