RunRyder RC Helicopter Topic - Evo 50 Tail rotor blades /gearing

RR Rated M For Mature

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 680 ONLINE 80 EVENTS SEARCH REGISTER START HERE

1 page

349 views

POST REPLY

Mikado Modellhubschrauber	.	Futaba-RC	.	Boca Bearings
	.		.

HIROBO Turbulence - SDX - Freya - Sceadu > Evo 50 Tail rotor blades /gearing

Scotty
Heliman
Location: Calgary, Canada

My Posts This: Topic Forum

Hi guys
I am finding that on my evo 50 that the tail is letting go under hard 3d. I am using the 90 mm mah blades. I switched to the 95 mm mah blades which have considerably more blade area and it is a big improvement. Is this the solution or should I be speeding up the tailrotor with a gearing change as well?......Also I can't seem to find a list of upgrades for Hirobo machines....Does anybody have a web sight with those? Also I need a part number for the tr speed-up gear as well.
Just as a side-note...I just tried a set of the Rotortech 600's on this thing and they Rock!
They are very stiff and seem to transfer the engine power into performance, not into blade slap noise...the performance increase from Maverikk cf blades to these was night and day! This machine now tracks arrow straight at full speed....the Maverikks vere very pitcy in fff.....the machine is otherwise stock and I'm liken' it

Scotty

02-13-2004 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE

Inspector Fuzz
Veteran
Location: NLA

My Posts This: Topic Forum

Tail authority

Scotty,
The speed up pulley, if I recall correctly,is the same one that is used on the Freya, stock part.. I don't recall the number... I am using it with 90 mm blades and it holds during very fast backwards in STILL conditions.. It it is the leas bet breezy, then the tail often blows out, I am going to try the 95's..
JEFF

P.S. You want the "drive" pulley, i.e. the one that goes on the shaft driven by the main gear...

02-13-2004 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE

mrNoodles
rrProfessor
Location: Borlänge, Sweden

My Posts This: Topic Forum

#0414-119 is the 18T pulley

/Fredrik
'Hm now I just have to find out where to connect the GV1 sensor to the Jazz80 ESC.

02-13-2004 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE HOMEPAGE GALLERY

Scotty
Heliman
Location: Calgary, Canada

My Posts This: Topic Forum

Thanks guys

02-16-2004 Over year old.

PROFILE PM EMAIL POSTS BUDDY IGNORE

1 page

349 views

POST REPLY

XHELI.COM	.	Advantage Hobby	.	Revolution Models
	.		.

HIROBO Turbulence - SDX - Freya - Sceadu > Evo 50 Tail rotor blades /gearing

Print TOPIC

Advertisers

Subscribe to This Topic