RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 596 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page395 viewsPOST REPLY
CANOMOD . Experience RC . Heli-Max

.
.
Thunder Tiger Raptors 30-90 - Imperio > Link Measurements
 
 
RC-Hawk
Senior Heliman
Location: Westminster Colorado

My Posts This: Topic  Forum		Can anyone tell me the measurements for the Dual ball links?
My Rappy doesn't have them, (second hand heli). I want to make sure I get them right. Look in the book and at http://www.raptortechnique.com.
Can't find the numbers anywhere....
Help??!
04-12-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Hooked
Senior Heliman
Location: Trenton OH

My Posts This: Topic  Forum		Center to center 66mm and 84mm. This is the starting point, then make sure your control arms are straight down and 90 degrees.
04-12-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
RC-Hawk
Senior Heliman
Location: Westminster Colorado

My Posts This: Topic  Forum		Sorry, I think I said wrong...
I am looking for the short "dual head" ball links that go from the blade to the short end of the mixing lever.
Part number BV0085.
Sorry for the confusion..
And thanks for any and all assistance.
04-12-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Hooked
Senior Heliman
Location: Trenton OH

My Posts This: Topic  Forum		3mm they come in a pak of two part #PV0040. you were right they are called double links
04-12-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
RC-Hawk
Senior Heliman
Location: Westminster Colorado

My Posts This: Topic  Forum		But what is the distance between the holes?
I have a load of links and rods.. Just no numbers. I can't seem to find them locally, so I figured I would make a set and fly this weekend.
I know you said 3mm, but that seems like it could be a bit short "for ball to ball".
Thanks again..
04-12-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Hooked
Senior Heliman
Location: Trenton OH

My Posts This: Topic  Forum		30mm is the center to center measurement. Have to excuse the typo, if you plan on using standard balllinks they are to long, you'll have to cut of some of the length off and then screw your rod in to get the 30mm measurement because the standard balllink will not let it go small enough. Sorry it's took so many post to finally get it right. Hope I helped. Steve
04-12-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
RC-Hawk
Senior Heliman
Location: Westminster Colorado

My Posts This: Topic  Forum		Great!!
Thanks for all of the help. Hopefully, "if the gods of computers and networks will smile upon me", I will be in the air tomorrow evening.
Thanks for all of the help.
04-12-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page395 viewsPOST REPLY
Hobby Hut . Heli Wholesaler . JR-Spektrum

.
.
Thunder Tiger Raptors 30-90 - Imperio > Link Measurements
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 5:23 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF