RunRyder RC
 2  Topic Subscribe
WATCH  1 page 392 views POST REPLY
Scorpion Power Hitec RCD
krajewski46

Heliman

Rotherham, South Yorkshire

My Posts: All  Forum  Topic

Has Dji now finished producing and answering questions in relation to their Naza-h that I bought new recently? Email questions are not answered and the software update link comes up with error404 - page not available on the web.

My new outfit was test flown today and rudder decayed to stick inputs to virtually none on landing. Gyro response is not effected and full movement occurs during setup testing. Also the rudder gain has stopped working from the tx. switch

Any advise please?

02-04-2017 08:37 PM
PM  EMAIL  Attn:RR
Dan Minick

Key Veteran

Columbus, WI

My Posts: All  Forum  Topic

Have you tried the search function? I have helped setup a few of these over the years, but without looking at a manual its hard to diagnose.

Team Synergy, Team FBL Rotors---Formerly Dyecocker1-------if its not broke...it will be!

02-05-2017 04:24 AM
PM  EMAIL  GALLERY  Attn:RR
krajewski46

Heliman

Rotherham, South Yorkshire

My Posts: All  Forum  Topic

Thank you Dan for replying. Excuse my ignorance but "search" what please. There's nothing on the set up page and the update link is severed. The downloaded instruction manual has no fault page and I'm in the process of registering on the Dji Naza-h forum for advice. Google and you tune has come up with stuff which I will explore and make known if cured. Thanks

02-05-2017 12:38 PM
PM  EMAIL  Attn:RR
Dan Minick

Key Veteran

Columbus, WI

My Posts: All  Forum  Topic

I just meant use the forum search function. Take a look at these threads, I noticed there are some videos as well and see if anything can help you. Are you saying the tail movement actually changed while in flight?

http://rc.runryder.com/helicopter/s...JI+Naza+H&f=XXX

Team Synergy, Team FBL Rotors---Formerly Dyecocker1-------if its not broke...it will be!

02-05-2017 01:22 PM
PM  EMAIL  GALLERY  Attn:RR
krajewski46

Heliman

Rotherham, South Yorkshire

My Posts: All  Forum  Topic

Thank you again Dan, much appreciated. Yes, in flight. The maiden involved a lift -spot on. Some rudder checks to assess kick back on stick release - no kick back then left and right cyclic with quick releases - no kick back or oscillations. Bit severe really - forgot expos. Then into a circuit. No tail wag until half way around a left turn then wag which settled on centre stick and brought it back.. on turning to land tail in, the response was slow and on landing the lack of movement was apparent. Still responsive to gyro movements and setup but not to the stick or gain switch. I've a fair bit of time available tomorrow to recheck everything against my saved settings. Thanks again

02-05-2017 02:07 PM
PM  EMAIL  Attn:RR
Dan Minick

Key Veteran

Columbus, WI

My Posts: All  Forum  Topic

Do you have another servo you could test? Also make sure the pulse width is set correctly for your servo type

Team Synergy, Team FBL Rotors---Formerly Dyecocker1-------if its not broke...it will be!

02-05-2017 02:13 PM
PM  EMAIL  GALLERY  Attn:RR
krajewski46

Heliman

Rotherham, South Yorkshire

My Posts: All  Forum  Topic

Thanks again Dan. I'm using an align DS620 at the correct settings 1500/333. The servos ok but I'll borrow a futaba it all else fails

02-05-2017 03:14 PM
PM  EMAIL  Attn:RR
Dan Minick

Key Veteran

Columbus, WI

My Posts: All  Forum  Topic

Sounds good,just wanted to check.

Team Synergy, Team FBL Rotors---Formerly Dyecocker1-------if its not broke...it will be!

02-05-2017 07:13 PM
PM  EMAIL  GALLERY  Attn:RR
Heli Fanatix

Veteran

Fountain Valley, CA

My Posts: All  Forum  Topic

I'm sorry to tell you to just cut your loose and move on to a Skookum 720BE with GPS if you must use something with a GPS.
- The skookum does offer return to home
- a Hard Deck Feature.

I'm no rookie but when setting up a Haza H, it's was a nightmare
- Support is strictly e-mail from overseas
- I would list everything I'm using and they would ask again
- a lot of back & forth none sense

When I finally got everything working
- Figured it out myself
- the GPS would not initialize
- the rudder mysteriously gave out 10 sec after lift off
- 3 months of trying to problem solve

Now combine the Haza H with questionable Horizon Hobby products, it was a nightmare. I tried to my best but no dice ..... total waste of time.

- Scott

02-05-2017 07:34 PM
PM  EMAIL  GALLERY  Attn:RR
Dan Minick

Key Veteran

Columbus, WI

My Posts: All  Forum  Topic

Support is strictly e-mail from overseas
Isnt it funny how big DJI got providing ZERO support for any of their products? Even the email system is useless

I have gotten several to fly for others, never owned one myself

Team Synergy, Team FBL Rotors---Formerly Dyecocker1-------if its not broke...it will be!

02-05-2017 07:53 PM
PM  EMAIL  GALLERY  Attn:RR
Heli Fanatix

Veteran

Fountain Valley, CA

My Posts: All  Forum  Topic

Hey Dan,

DJI support their other products except for the NAZA H.
- strictly via e-mail

I would be happy if they allow online chat
- now combine that with the lost in translation feature.

- Scott

02-05-2017 09:12 PM
PM  EMAIL  GALLERY  Attn:RR
Dan Minick

Key Veteran

Columbus, WI

My Posts: All  Forum  Topic

I have tried on several different quads I have worked on for friends over the years and never had any luck

Team Synergy, Team FBL Rotors---Formerly Dyecocker1-------if its not broke...it will be!

02-05-2017 09:31 PM
PM  EMAIL  GALLERY  Attn:RR
krajewski46

Heliman

Rotherham, South Yorkshire

My Posts: All  Forum  Topic

Thank you guys for your advice. I have a Skookum with gps set up on another working model and thought I'd give the Naza-h a try out at half the cost and apparent better position hold. Admittedly I would prefer the selectable return to home without having to turn the transmitter off first which Skookum offers. Perhaps not a wise choice.

However, going back to the original request, it would appear that during the test flight, the Naza-h was in heading hold and learned that there was no gain channel in use on my transmitter during the flight resulting in 0% gain.

That channel has not been allocated and full use of the tail servo is present.

What I fail to understand is why the Naza-h responded to the 3 position gain switch in the first place when it had not been set up???

Until next time, thanks again guys

02-06-2017 11:11 AM
PM  EMAIL  Attn:RR
Heli_Splatter

Key Veteran

Silver Spring, MD by way of Sidney, Ne - USA

My Posts: All  Forum  Topic

I have had some good luck with Naza-M for multi-rotor. You have to read and re-read. I think that there are others with Naza-H success.

Don't make all you decisions on what you see here so far. I do want to try the scookum.

02-07-2017 09:54 PM
PM  EMAIL  GALLERY  Attn:RR
Heli Fanatix

Veteran

Fountain Valley, CA

My Posts: All  Forum  Topic

.... you can learn the easy way or the hard way.

Naza M is not the same as Naza H.
- You can get some kinda of online support with the Naza M.

For the Naza H
- none existent support
- there is No Return Home
- and do you really have to have your heli locked in one single spot, if you must have it ... than you gotta deal with all kinds of wires, harness and hardware.

If it worked and worth while .. I would say so and suggest it. I wouldn't want someone going through what I went through trying to setup the Naza H.Even when you get it to work, cross your fingers and hope it stays working. If you want to use it for aerial photography, I would think you want your equipment on a solid platform.

Go back and look at all my post.. have I ever suggested anything accurate? Just letting you know .. if you go down that route, good luck. You will need it.

- Scott

02-08-2017 02:15 AM
PM  EMAIL  GALLERY  Attn:RR
WATCH  1 page 392 views POST REPLY
ProModeler Scorpion Power
 Print TOPIC Advertisers 

 2  Topic Subscribe

Sunday, February 26 - 12:47 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies