RunRyder RC
 2  Topic Subscribe
WATCH  1 page 292 views POST REPLY
Hitec RCD ProModeler
MrCarbon

Senior Heliman

Upstate, New York: Warwick, NY

My Posts: All  Forum  Topic

Hi , I just bought an older (V1), but unused set of the night blades and need some operational information on them. These blades have the internal batteries and a 3-pin plug goes into the root plug-in port. There are no external packs to install.

I am looking for some operational information on how to turn them on and how to re-charge them.

I used to sell MS Composit blades which utilized the same small 3-pin port to turn them on and to re-charge them but I am unsure if these operate the same way.

I cannot measure any voltage at the pins save for a .0570vdc ?

Any help or guidance is appreciated.

Regards,

Joe

PS Even some information on how to contact Fun-Key in Japan might help...

01-26-2017 12:49 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
don s

Key Veteran

Chesapeake, VA

My Posts: All  Forum  Topic

http://jettechmodels.com/contact-us/

E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.

01-26-2017 02:27 AM
PM  EMAIL  GALLERY  Attn:RR
MrCarbon

Senior Heliman

Upstate, New York: Warwick, NY

My Posts: All  Forum  Topic

Looks like this is the charger I need CN269912 Of course no longer available through Century... Anybody have one of these ??

01-26-2017 03:16 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
oldfart

rrProfessor

Vancouver, Canada

My Posts: All  Forum  Topic

Try Leisure Tech Products:

orders@leisuretech.ca

If they do not have any in stock I am sure they will be able to order one from FunKey for you.

Phil

01-26-2017 03:33 AM
PM  EMAIL  GALLERY  Attn:RR
MrCarbon

Senior Heliman

Upstate, New York: Warwick, NY

My Posts: All  Forum  Topic

Thank you, I dropped them a line. I am hopeful someone has one laying around...

01-26-2017 06:06 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
GyroFreak

rrProfessor

Orlando Florida ...28.49N 81.22W

My Posts: All  Forum  Topic

If they are like my old night blades, two pins are for charging, one of them is common.
To turn them on you jumper common and the other pin.
a .0570vdc
Your blade batteries sound very very dead, unless a reverse diode is in the way of your measurement.

. Hope you can get them back to working.

I think about the hereafter. I go somewhere to get something, then wonder what I'm here after ?

01-26-2017 06:19 PM
PM  EMAIL  GALLERY  Attn:RR
WATCH  1 page 292 views POST REPLY
Scorpion Power Hitec RCD
 Print TOPIC Advertisers 

 2  Topic Subscribe

Tuesday, February 21 - 12:39 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies