RunRyder RC
 1  Topic Subscribe
WATCH  1 page 85 views POST REPLY
Scorpion Power Hitec RCD
RAK402

Elite Veteran

Alhambra, CA

My Posts: All  Forum  Topic

I am about 12 hours into the assembly process.

So far everything fits well and the finish on the parts is amazing!

I am following Scott's build thread as I assemble things (I got a bit ahead by late this evening)!

Team KBDD/Compass Team Manger/Experience RC/Team JR Americas/WR Field Rep

01-12-2017 06:36 AM
PM  EMAIL  GALLERY  Attn:RR
RAK402

Elite Veteran

Alhambra, CA

My Posts: All  Forum  Topic

About seven more hours into it again today-motor/pinion is in, all soldering completed, ESC/ESC Fan installed, BEC installed, RPM (telemetry) sensor installed, Battery Voltage (telemetry) sensor installed, battery tray fitted, tail belt tension set. The canopy was test fit as well. Getting the wires run from the servos, sensors, BEC, and ESC routed and insulated in foam is next.

Team KBDD/Compass Team Manger/Experience RC/Team JR Americas/WR Field Rep

01-14-2017 01:46 AM
PM  EMAIL  GALLERY  Attn:RR
RAK402

Elite Veteran

Alhambra, CA

My Posts: All  Forum  Topic

eXo#1 nearing completion!

Doing minor detail stuff right now! I used a second gyro tray for a wiring cover and as an antenna mount.

Crew Chief is visible in the background just behind the canopy in the first photo:

My intention is to move the yellow wire for the telemetry sensor inside on ship #2, then go back and correct it on this one.

Team KBDD/Compass Team Manger/Experience RC/Team JR Americas/WR Field Rep

01-17-2017 12:26 AM
PM  EMAIL  GALLERY  Attn:RR
WATCH  1 page 85 views POST REPLY
ProModeler Scorpion Power
 Print TOPIC Advertisers 

 1  Topic Subscribe

Saturday, February 25 - 8:23 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies