RunRyder RC
 1  Topic Subscribe
WATCH  1 page 210 views POST REPLY
Hitec RCD ProModeler
Doug

Elite Veteran

Port Saint Luice Florida....

My Posts: All  Forum  Topic

"Good" meaning "bad" = "I broke it" I was practicing "cubes" in an open field and was doing good. I came down to change batteries and took back off up to about 100' and did a front flip, throttle to idle and I got the "dead duck"mode, I forgot to flip to Air mode. So if flip to air mode and the power comes back up (just as it hits the ground inverted); not too bad broken PDB, broken upper frame, one disintegrated motor, 4 props and a Runcam 2 in about 5 pieces. new bits coming.

First member of Member of Bearings Anonymous

01-04-2017 06:46 PM
PM  EMAIL  GALLERY  Attn:RR
Doug

Elite Veteran

Port Saint Luice Florida....

My Posts: All  Forum  Topic

Well the only damage is large crack across PDB and the upper and lower frame. The NAZE 32 has a corner broken off, a totally destroyed Runcam2, two motors with the bells broken off, otherwise no damage

First member of Member of Bearings Anonymous

01-19-2017 10:57 PM
PM  EMAIL  GALLERY  Attn:RR
Doug

Elite Veteran

Port Saint Luice Florida....

My Posts: All  Forum  Topic

Well, I got it back in the air, It is virtually a new machine; new frames, new NAZE 32, new Massive PCB, new ESC's, New motors and new Runcam2.
First flight was unnecessarily exciting, the Massive PCB rotates the position of the NAZE 90 deg CW which is a 270 deg CCW offset in Clean-flight, I forgot to change it.

First member of Member of Bearings Anonymous

01-29-2017 02:56 PM
PM  EMAIL  GALLERY  Attn:RR
WATCH  1 page 210 views POST REPLY
Scorpion Power Hitec RCD
 Print TOPIC Advertisers 

 1  Topic Subscribe

Monday, February 20 - 10:33 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies