RunRyder RC
 3  Topic Subscribe
WATCH  1 page 269 views POST REPLY
Scorpion Power Hitec RCD
StevieM

Heliman

Surrey UK

My Posts: All  Forum  Topic

Folks,

Picked up 2nd hand one, where helical main fitted.
-
Noticed that that the tailrotor drive is offset .
-
Does anyone have any idea how to remove this offset?
-
Please shout if you have any ideas.
-
Many thanks, Steve
-

12-17-2016 11:58 PM
PM  EMAIL  Attn:RR
FNFAL

Heliman

Dayton OH

My Posts: All  Forum  Topic

This appears to be a common issue and most fly it with little affect in this condition. However, if it bothers you, you can sometimes switch the main shaft spacer (.5 or .3mm) from the factory assigned top bearing block position to the bottom between the block and main gear.

The only caveat it that re-assembly is a little more tricky and best performed upside down as you do not want the spacer to be pinched on the shaft step. A reliable sign that it is, will be a difficult to achieve insertion of the cross-bolt.

12-19-2016 02:12 PM
PM  EMAIL  GALLERY  Attn:RR
N2587N

Heliman

brainerd mn crowwing

My Posts: All  Forum  Topic

There are two different one war bearings all so the one way bearing may not be pressed all the way into housing ,

12-19-2016 04:51 PM
PM  EMAIL  GALLERY  Attn:RR
StevieM

Heliman

Surrey UK

My Posts: All  Forum  Topic

I'll try moving the shim.
-
Many thanks for your replies.
-
Rgds, Steve

12-21-2016 01:41 AM
PM  EMAIL  Attn:RR
jason46

Veteran

MI

My Posts: All  Forum  Topic

That's how mine was even after I played with the shims, yours is slightly better than mine was .

We made up some rules can we have your moneys now.

12-23-2016 02:48 AM
PM  EMAIL  GALLERY  Attn:RR
mr dan

Veteran

Stockton Calif

My Posts: All  Forum  Topic

Place your shim between the lower bearing block and the main gear.

"R.I.P Roman" Citizen 0094 in the Nation

12-25-2016 08:54 PM
PM  EMAIL  GALLERY  Attn:RR
WATCH  1 page 269 views POST REPLY
ProModeler Scorpion Power
 Print TOPIC Advertisers 

 3  Topic Subscribe

Monday, February 27 - 1:56 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies