RunRyder RC
 2  Topic Subscribe
WATCH  1 page 213 views POST REPLY
Scorpion Power Hitec RCD
rbort

rrProfessor

Franklin, MA - USA

My Posts: All  Forum  Topic

Can anybody please tell me how long this shaft is, how thick it is, and the distance between the holes for the pins and to the ends?

Thanks!

-=>Raja.

MA 1005 H280, 4060 flts
Raptor 90 H300, 267 flts
Spectra 27 3DMax, 3140 flts
Whiplash V1 27 3DMax, 1320 flts
Whiplash V2 H300, 45 flts

11-20-2016 05:27 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
Mersea Heli

Heliman

Mersea Island UK

My Posts: All  Forum  Topic

Hello Raja
The shaft is 81mm long x 5mm in dia, the pins are 13.5mm center to end and 5.5 the other end

11-20-2016 09:12 PM
PM  EMAIL  Attn:RR
rbort

rrProfessor

Franklin, MA - USA

My Posts: All  Forum  Topic

Thanks for the reply!

Thanks for the information!

Its a project I'm trying to do, I have an on-board generator I need to attach to the shaft on my Raptor 90 and I wanted a longer shaft to fit with the gears in the same place but stick out of the bottom of the front tail gear box by about 15mm.

My original shaft is 55mm center to center between the holes so the one you have won't work. Also the distance from the top of the shaft to the center of the pin is 8.5mm.

If you know of any shaft like this, top end to center 8.5mm then 55mm more another pin hole and then 20 to 25mm longer past the center of the 2nd hole that would be perfect please let me know.

Otherwise I may have to have one made to fit.

-=>Raja.

MA 1005 H280, 4060 flts
Raptor 90 H300, 267 flts
Spectra 27 3DMax, 3140 flts
Whiplash V1 27 3DMax, 1320 flts
Whiplash V2 H300, 45 flts

11-22-2016 05:19 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
Mersea Heli

Heliman

Mersea Island UK

My Posts: All  Forum  Topic

Hello Raja
Sorry to misinform you, i gave you the sizes for PV1596 the tail output shaft. But it still does not help as PV1538 is shorter being only 56mm long with holes being 14.5 one end and 9mm the other....
Regards Adrian

11-22-2016 08:59 PM
PM  EMAIL  Attn:RR
WATCH  1 page 213 views POST REPLY
ProModeler Scorpion Power
 Print TOPIC Advertisers 

 2  Topic Subscribe

Thursday, February 23 - 6:26 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies