RunRyder RC
 19  Topic Subscribe
WATCH  6 pages [ <<    <     3      4     ( 5 )     6     NEXT    >> ] 3381 views POST REPLY
Scorpion Power ProModeler
chopper37

Veteran

FL350

My Posts: All  Forum  Topic

That's great, hope he doesn't read it, lol but what's with the thumbs you'll have to break him of that one.

11-16-2016 09:03 PM
PM  EMAIL  GALLERY  Attn:RR
Peter WalesElite Veteran - Orlando Fl - My Posts: All  Forum  Topic

Well, I fitted all the clothes on a guy and tried to get him into the cockpit. His head was on the roof and the joystick was hitting him in the naughty bits. So, he had to go, the girl came back, got "de-butched" with some lipstick and her pullover stretched across her chest. I couldn't find any decent shoes for her so I ordered a pair on E-bay, which will cruise over from China and arrive some time in the distant future

Then I attacked the turbine! Vario didn't help supplying parts that didn't fit and to me the thing looks too small, but that's what I have and it will have to do. It may come off. What do you guys think?

And just in case it stays, here is the finished helicopter. I have to say, I like it and it flies great. I dont think the non scale parts are that important when you are having fun.

Peter Wales
http://scalehelicopters.org

11-16-2016 09:13 PM
PM  EMAIL  HOMEPAGE  Attn:RR
garyl

Veteran

taxachussetts

My Posts: All  Forum  Topic

If you don't like Vario's engine Solidworks and the 3D printer could take care of that issue.

11-16-2016 09:44 PM
PM  EMAIL  GALLERY  Attn:RR
chopper37

Veteran

FL350

My Posts: All  Forum  Topic

Engine not bad but the angle? Maybe longer supports in rear to level it out might help

11-16-2016 10:28 PM
PM  EMAIL  GALLERY  Attn:RR
Peter Wales

Elite Veteran

Orlando Fl

My Posts: All  Forum  Topic

You are right, it should not slope down, but thats what they gave me to use.

I will look at it again tomorrow and ensure I have it installed right, and if it is, then I will make up some longer supports from the ones that didn't fit.

printing that engine would be a long print run. Probably in 3 or more pieces and the tail pipe would be the longest running part, so about 30+ hours to print at a guess.

Peter Wales
http://scalehelicopters.org

11-17-2016 02:51 AM
PM  EMAIL  HOMEPAGE  Attn:RR
Peter WalesElite Veteran - Orlando Fl - My Posts: All  Forum  Topic

Ok, I moved the front supports further back to lower the front of the turbine and yes, it does look a lot better.

That's it, it's done. Now it's on to something else.

Peter Wales
http://scalehelicopters.org

11-17-2016 03:22 PM
PM  EMAIL  HOMEPAGE  Attn:RR
DCORSAIR

Veteran

Selma, Calif.

My Posts: All  Forum  Topic

Sweet, that Lama looks really nice. You did a great job on it for sure.

D. Lee.....t.Born again.t.....

11-17-2016 03:29 PM
PM  EMAIL  GALLERY  Attn:RR
doorman

rrProfessor

Sherwood, Arkansas

My Posts: All  Forum  Topic

Looks Great!!!!

Very nice job Peter!!!!
You have done it proud

Have fun with it....

Stan

AMA 2918-Team JR, Spin Blades, East Coast Scale Helicopter,Castle Creations

11-17-2016 03:52 PM
PM  EMAIL  GALLERY  Attn:RR
chopper37

Veteran

FL350

My Posts: All  Forum  Topic

Congrats great job, you gave us a lot of build info for others building this kit.

11-17-2016 04:31 PM
PM  EMAIL  GALLERY  Attn:RR
ssmith512

Key Veteran

Indianapolis, IN USA

My Posts: All  Forum  Topic

That turned out really nicely!!

I might have to get me one of these. Thanks for sharing the build!

Steve

11-17-2016 05:03 PM
PM  EMAIL  GALLERY  Attn:RR
Peter Wales

Elite Veteran

Orlando Fl

My Posts: All  Forum  Topic

Thanks guys, now all I have to do is to get it off Marcus. He will want a damn good heli in trade for it, maybe the 407

One comment I forgot to answer
That's great, hope he doesn't read it, lol but what's with the thumbs you'll have to break him of that one.
You have to remember, he is of the X-box generation. They use thumbs on the controllers all the time. I'm going to try and get him onto fingers and thumbs, but it wont be easy.

So now I have gone into something completely different and am getting the 1/4 scale EC 120 in the air. I haven't bothered with it up to now as there have been horses in my flying field so if I have a problem and it hits one I will be in big trouble. Now they are inside for the winter (there's no grass in that pasture for them to eat as its been too dry) I can fly over the other fields as far as I can see. Saturday will be the last flying day for a while as the temperature is due to drop below freezing. I think it will get as low as 66 degrees for a high, and if its colder than my age, that's below freezing

Peter Wales
http://scalehelicopters.org

11-17-2016 07:14 PM
PM  EMAIL  HOMEPAGE  Attn:RR
chopper37

Veteran

FL350

My Posts: All  Forum  Topic

X-box generation never gave that a thought, good one.

11-17-2016 07:18 PM
PM  EMAIL  GALLERY  Attn:RR
payne1967

Elite Veteran

uk

My Posts: All  Forum  Topic

if he's happy and can fly well with thumbs leave well alone
after all its all about the young man enjoying his flying
not how he uses the tx sticks

and yes I fly thumbs it just was the natural way I used the tx
if your asking yes i'm an apprentice old git, (working my way up year by year)

member of save the flybar foundation

11-17-2016 08:39 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
Grimracer

Veteran

Eau Claire WI

My Posts: All  Forum  Topic

I like it.. the build was fun.. (I learned a lot) and the machine looks awesome.. fun to watch it come together.

Thanks again

Grim

Michael J Zaborowski

11-17-2016 11:58 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
Peter Wales

Elite Veteran

Orlando Fl

My Posts: All  Forum  Topic

Arrgghhh DOOM and DISASTER

Marcus said he did not want to come flying today, he wanted to go to a horse show as his GIRLFRIEND would be there!!

I guess I have lost him to his maturing love life

Peter Wales
http://scalehelicopters.org

11-19-2016 02:04 PM
PM  EMAIL  HOMEPAGE  Attn:RR
goodhunting

Senior Heliman

Slovenia ... somewhere in Europe

My Posts: All  Forum  Topic

At least you're left with a beautiful helicopter...

Gh

11-19-2016 02:10 PM
PM  EMAIL  GALLERY  Attn:RR
chopper37

Veteran

FL350

My Posts: All  Forum  Topic

OH BOY!LOL
At least you're left with a beautiful helicopter

11-19-2016 02:22 PM
PM  EMAIL  GALLERY  Attn:RR
CoachE

Senior Heliman

Cincinnati, ohio -usa

My Posts: All  Forum  Topic

peter-

i feel your pain!!! My son did me like that and i lost the best co-pilot i had....well it is. what it is!

Team JR / StarwoodScaleModels Get !T - Got !T - Perfect !T

11-19-2016 03:08 PM
PM  EMAIL  GALLERY  BLOGAttn:RR
Peter Wales

Elite Veteran

Orlando Fl

My Posts: All  Forum  Topic

Damn hormones! I told him he's too young to be chasing wimmen, but he just gave me that "you are too old to understand" look

Peter Wales
http://scalehelicopters.org

11-19-2016 08:43 PM
PM  EMAIL  HOMEPAGE  Attn:RR
Grimracer

Veteran

Eau Claire WI

My Posts: All  Forum  Topic

Peter.. I suspect you planted a seed.. you will see.. he will be back at your side at some point.

Grim

Michael J Zaborowski

11-19-2016 11:02 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH  6 pages [ <<    <     3      4     ( 5 )     6     NEXT    >> ] 3381 views POST REPLY
Scorpion Power ProModeler
 Print TOPIC Advertisers 

 19  Topic Subscribe

Tuesday, January 17 - 6:48 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies