RunRyder RC
 2  Topic Subscribe
WATCH  1 page 250 views POST REPLY
Scorpion Power AlignRC
YankieSole

Senior Heliman

Lynchburg, virginia

My Posts: All  Forum  Topic

Quick question. I recently bought a goblin 380 off the forums. It has the ikon. The guy I bought it from was gracious enough to email me the model info spm file. I've never transferred a model and don't exactly know how to go about it. I have a memory card in my dx9 but I don't think I've ever saved anything to it before. I have a MacBook Pro but I'm running iOS and windows 10. Could someone list the steps i need to do to get this model setup on my tx? I did a few searches but everything that I can find is for transferring from the dx8 to the dx9

Robert

10-12-2016 10:58 PM
PM  EMAIL  GALLERY  Attn:RR
Heli_Splatter

Key Veteran

Silver Spring, MD by way of Sidney, Ne - USA

My Posts: All  Forum  Topic

First I think that you need to use a conversion tool to change the file to the correct radio format.

http://mutantdesign.co.uk/spm/ Note there is a link to a long thread about this tool on the page.

Then you just upload to a blank memory space and bind the aircraft to the radio. You should be careful and check everything out.

10-12-2016 11:32 PM
PM  EMAIL  GALLERY  Attn:RR
YankieSole

Senior Heliman

Lynchburg, virginia

My Posts: All  Forum  Topic

This is what I get when I try that???

Robert

10-12-2016 11:52 PM
PM  EMAIL  GALLERY  Attn:RR
YankieSole

Senior Heliman

Lynchburg, virginia

My Posts: All  Forum  Topic

I might add that the previous owner was using a dx18

Robert

10-12-2016 11:55 PM
PM  EMAIL  GALLERY  Attn:RR
pctomlin

Senior Heliman

Texas

My Posts: All  Forum  Topic

The DX18 and DX9 spm files should be directly compatible and just need uploading as typical to a selected model in your transmitter when copied to the SD card. Plenty of YouTube vids and online instructions for uploading a spm file.

Why is it someone so bad at being in charge......... wants to be in charge so bad?

10-13-2016 03:33 AM
PM  EMAIL  GALLERY  Attn:RR
Heli_Splatter

Key Veteran

Silver Spring, MD by way of Sidney, Ne - USA

My Posts: All  Forum  Topic

I guess that I assumed he had at least tried it and failed.

There should be some vids on doing that, but it is really not that difficult. Put file on chip, import into blank model memory.

10-13-2016 11:53 AM
PM  EMAIL  GALLERY  Attn:RR
old nitroman

Senior Heliman

Naples florida

My Posts: All  Forum  Topic

I did from dx8 to dx18 worked perfect.

E5s and E7se, Roban bell 222 800 superscale,450 bell 4 bladed head,gobby 380,180cfx

10-14-2016 01:53 AM
PM  EMAIL  GALLERY  Attn:RR
WATCH  1 page 250 views POST REPLY
Thunder Power RC ProModeler
 Print TOPIC Advertisers 

 2  Topic Subscribe

Saturday, December 3 - 2:24 am - Copyright © 2000-2016 RunRyder   EMAILEnable Cookies