RunRyder RC
 3  Topic Subscribe
WATCH  1 page 142 views POST REPLY
ProModeler Scorpion Power
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

So now you can use VControl with anything
http://shop.mikado-heli.de/VBar-Elec...&c=8035&p=8035
VBar NEO VBasic (VBasic) is an innovative receiver for VBar Control, setting new standards with regard to range of features, and fit for the future with updates and function extensions.

Features:

Easy setup via VBar Control Setup Wizard and clearly structured menus in VBar Control
Using Presets and the Setup Wizard you get ready for flight quickly—for almost any application, like R/C-cars, boats, planes, jets, as a receiver for a multi-rotor flightcontrol, as a receiver for other flybarless systems
Competition-ready since it does not use gyros
5 analog control functions and programmable switching functions
9 physical outputs (servo connectors)
3 parameter banks (flight modes/-conditions)
6 mixers with 5 inputs, differential mix, servo-throw adjustment, servo-travel limit
expo, trims and multi-rate per parameter bank and control input
throttle channel with idle trim (via rotary knob) and throttle idle for each parameter bank
innovative, self-learning trim concept without help of gyros (trim while you control the model), optional trim by means of rotary knobs, EDS dial on VBar Control
Buddy-boxing ready, also cross-over-buddy-boxing ready (VBar Control together with a radio of a different brand)
Model Sharing (bind and fly)
Ready for VBar Control telemetry sensors or ­Kontronik® TelMe
Event Log
Macrocells offer freely programmable mixers, 7-point curves, sequencers e.g. for retracts
Multiprotocol Single Line Receiver: connect to other systems via proprietary or open protocols like Futaba® S.Bus, Spektrum® satellite protocol simulation, Universal Digital Interface (UDI), analog PPM8 or PPM12 (8/12 channels), with variable update rate, both as input and output possible
Connect multiple VBasic and/or VBar NEO devices via Interbus to get a multi-redundant diversity receiver setup (up to 4 diversity receivers/8 antennae), with up to 23 physical outputs (servo connectors)
Ready for updates as they come available—with software updates you can enable VBasic for other purposes, for more complex airplanes (VPlane), for helicopters (VBar), for multi-rotors (VCopter), and VBar and VCopter of course with the tried and tested Rescue feature—all required sensors are already on board
For a full overview about the update-options as well as extensive and current online documentation, please visit http://www.vstabi.info/vbasic
These features make VBasic probably the most flexible receiver product on the planet, with unrivalled connectivity to products of other manufacturers

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

09-28-2016 03:11 PM
PM  EMAIL  GALLERY  Attn:RR
THX1138

Elite Veteran

Camp Bondsteel, Kosovo

My Posts: All  Forum  Topic

Sweet action!

Lou

Just give me five dudes and two flashbangs...

09-28-2016 03:26 PM
PM  EMAIL  GALLERY  Attn:RR
cudaboy_71

Elite Veteran

sacramento, ca, u.s.

My Posts: All  Forum  Topic

Feel free to clarify. But, from reading through the manual and the instructions this looks like a software downgrade for the Neo vlink?

particularly, this quote from page 8 of the manual:
You do not need to align the axis of
the device to the axis of the model unless you intend to use a
firmware with gyro stabilization.
So, does this mean you can purchase a 'basic' vlink or non-vlink Neo and upgrade it to express, pro or pro/rescue later on if desired?

if it ain't broke, break it.

09-29-2016 07:56 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
THX1138

Elite Veteran

Camp Bondsteel, Kosovo

My Posts: All  Forum  Topic

That's kind of how I read it...

Lou

Just give me five dudes and two flashbangs...

09-29-2016 08:11 PM
PM  EMAIL  GALLERY  Attn:RR
cudaboy_71

Elite Veteran

sacramento, ca, u.s.

My Posts: All  Forum  Topic

there's a lot more discussion over on the other forum. seems to have been answered rathher susinctly. yes, is is just a regular Neo without the license for express, pro or resuce.

It will be good for my bigger planes, going forward...though I still have 3 black vbars sitting on the shelf I can use for the price of a vcontrol sat. But, I was hoping for something smaller like the size of a vcontrol sat. Looks like I'll have to keep my old DX7 to fly any micro aircraft.

if it ain't broke, break it.

09-29-2016 08:32 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH  1 page 142 views POST REPLY
AlignRC Thunder Power RC
 Print TOPIC Advertisers 

 3  Topic Subscribe

Monday, December 5 - 4:34 pm - Copyright © 2000-2016 RunRyder   EMAILEnable Cookies