In the last few years I've owned 8-10 570's (Not Bragging)! Some were parted out & some sold RTF / ARF. During this collection I acquired multiple dozens of new parts. Now that I'm down to only enough parts to build one or two I decided to build this Beauty!
Frames are "OE" but I sprayed them Flat Black (Thought it went better against the Canopy) If you rather have Shiny CF, then wipe it off w/LT, should come off easily.
Frames, Canopy & Boom have 9 flights on them and 98% of the rest is brand new (Remember >I have A-LOT of parts)! The upper & lower Transmission Plates came off another Bird w/about 25-30 flights. Everything was chemically cleaned, all Bolts & threaded holes were chased to remove any old Loc-tite & all Bearings replaced with "Boca's" & the upper secondary bearing is Ceramic (Why you ask) because I had one new laying around and it didn't fit anything else I was presently flying so WHY-NOT?
I stiffened up the forward lower Boom area with a 630 cross brace (weak area here on both (500 & 570's)
Installed a HD Lynx Tail Assembly & KDE Pitch Slider Arm & new 105mm Blades.
The main head (HPS3) & 540mm BlackLine Blades "BRAND NEW"
Comes w/both Belts & Motor Pulley
Also w/2x Bat trays.
Except for the tiny crack you see under the Canopy Belly, this is a (9.9 out of 10 type bird) It is (10 of 10) in cleanliness.
This bird has had > Zero / "0" / Goose Egg > flights since assembled.
I also have (but not part of this sale) the stretch to 620mm kit = Belt / tail assemble w/Fin & Main Blades (no tail blades)
In Case you need electronics, I have those also ( No prices given out until Kit is sold) Too many Tire kickers out there.
I'll give it a couple weeks here & if not, then it's off to Ebay!