RunRyder RC
 5  Topic Subscribe
WATCH  1 page 209 views POST REPLY
AlignRC Scorpion Power
THX1138

Elite Veteran

Plainfield, IN

My Posts: All  Forum  Topic

Well, I've searched here on RR... I've followed the instructions on the Vstabi website.
The key file has been copied to the appropriate folder.
The Neo is recognized by my pc and says the drivers are up to date.
The Neo was booted with the boot plug, updated to v6.2.67...
It is a V-link model and it does connect to my Vcontrol.
I purchased the Pro software and it appears on my app list as available.
I have tried everything I can think of and the Neo will not reconnect to my pc to receive the Pro app.
I am stumped and about to pull my hair out!

Help!

Lou

Five dudes and two flashbangs...

08-18-2016 04:15 AM
PM  EMAIL  GALLERY  Attn:RR
balsapro

Veteran

Gallatin,TN

My Posts: All  Forum  Topic

Out on a limb but if you updated the firmware you must use the same software version on the pc

Try downloading and reinstalling the software again.

Otherwise it will need the drivers installed

Build the Best, Fly the Best, Crash the Best

08-18-2016 04:35 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
THX1138

Elite Veteran

Plainfield, IN

My Posts: All  Forum  Topic

Will try that right now...

Lou

Five dudes and two flashbangs...

08-18-2016 04:37 AM
PM  EMAIL  GALLERY  Attn:RR
THX1138

Elite Veteran

Plainfield, IN

My Posts: All  Forum  Topic

That didn't get it either... Also, the Vcontol connects just fine...

Lou

Five dudes and two flashbangs...

08-18-2016 05:23 AM
PM  EMAIL  GALLERY  Attn:RR
balsapro

Veteran

Gallatin,TN

My Posts: All  Forum  Topic

Did you install the drivers through the device manager.

Build the Best, Fly the Best, Crash the Best

08-18-2016 05:29 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
THX1138

Elite Veteran

Plainfield, IN

My Posts: All  Forum  Topic

Yep. Says drivers are up to date.

Lou

Five dudes and two flashbangs...

08-18-2016 05:49 AM
PM  EMAIL  GALLERY  Attn:RR
balsapro

Veteran

Gallatin,TN

My Posts: All  Forum  Topic

Doesn't matter if it says up to date

Manually install the driver... Right click then update driver

Don't do the search automatically

Point the driver folder to the vbar driver folder
Program files\vbar\driver

Build the Best, Fly the Best, Crash the Best

08-18-2016 06:04 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
THX1138

Elite Veteran

Plainfield, IN

My Posts: All  Forum  Topic

Still not working :-/ I uninstalled and reinstalled the drivers directing it to the folder specified... It has to be something simple I'm missing :-/

Lou

Five dudes and two flashbangs...

08-18-2016 11:07 AM
PM  EMAIL  GALLERY  Attn:RR
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

If you are trying to update the NEO to the newest firmware, the PC software is not needed and driver installation are not necessary.
Download the newest VControl Manager, and erase the old one of you have it.
Next connect the NEO to the computer and make sure the boot plug is installed in the sensor port. Now open the manager and then power up the NEO. The manager will update automatically. When you get the green check mark, all is good. Next update the VControl.
If trying to connect to the computer for NEO adjustment, update the NEO first, rpower down, remove the boot plug and then install the drivers. Erase any keyfiles on the computer previously installed or downloaded. Download he new one (you will see the NEO serial number in "red"...this will designate a new registration.
Install the keyfile in the right spot, power up the NEO.
Should fix your problems...

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

08-18-2016 02:18 PM
PM  EMAIL  GALLERY  Attn:RR
THX1138

Elite Veteran

Plainfield, IN

My Posts: All  Forum  Topic

Thank you sir! I will try this as soon as I get home from work.

Lou

Five dudes and two flashbangs...

08-18-2016 02:30 PM
PM  EMAIL  GALLERY  Attn:RR
THX1138

Elite Veteran

Plainfield, IN

My Posts: All  Forum  Topic

Negative ghost rider, the pattern is full.

I was able to successfully register the Neo yesterday. It does appear in the "my devices" list.

I have manually entered the drivers and Windows recognizes it as "Vbar Virtual Flybar Controller".

I have uninstalled the Vcontrol manager and deleted all associated files and performed a fresh install of 1.3.3.

I have downloaded the keyfile and copied it to the drivers folder.

Still no connection to the Vcontrol manager. I have tried connected and not connected to Vcontrol. I have tried with and with out the boot plug.

Lou

Five dudes and two flashbangs...

08-18-2016 11:52 PM
PM  EMAIL  GALLERY  Attn:RR
Helicrazy4

Veteran

BARBOURSVILLE,West Virginia

My Posts: All  Forum  Topic

have you look at these video's?
http://helifreak.com/showthread.php?t=698049

08-19-2016 12:06 AM
PM  EMAIL  GALLERY  Attn:RR
THX1138

Elite Veteran

Plainfield, IN

My Posts: All  Forum  Topic

The Vcontorl works perfectly, Absolutely no issues. It's the Neo that won't reconnect to Vcontrol manger software.

Lou

Five dudes and two flashbangs...

08-19-2016 12:20 AM
PM  EMAIL  GALLERY  Attn:RR
THX1138

Elite Veteran

Plainfield, IN

My Posts: All  Forum  Topic

But thank you though! Sorry, I'm just super frustrated.

Lou

Five dudes and two flashbangs...

08-19-2016 12:21 AM
PM  EMAIL  GALLERY  Attn:RR
Helicrazy4

Veteran

BARBOURSVILLE,West Virginia

My Posts: All  Forum  Topic

have you looked at these?
http://www.vstabi.info/en/node/1856

08-19-2016 12:31 AM
PM  EMAIL  GALLERY  Attn:RR
cudaboy_71

Elite Veteran

sacramento, ca, u.s.

My Posts: All  Forum  Topic

keyfile is not needed for vcontrol. that's what's messing you up.

reread the very first two sentences on the keyfile page:
Registration for Mini VBar and Full Size VBar (black, blue, silver). VBar NEO and VBar Control are registered through our App Store, please use the VBar Control Manager.
You don't need to register on vstabi. you don't need to transfer keyfiles. you just plug in the NEO to the Vcontrol manager software, get the green check, and you're done.

if it ain't broke, break it.

08-19-2016 12:40 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
THX1138

Elite Veteran

Plainfield, IN

My Posts: All  Forum  Topic

Then I will delete the keyfile and try again shortly...

Lou

Five dudes and two flashbangs...

08-19-2016 12:48 AM
PM  EMAIL  GALLERY  Attn:RR
THX1138

Elite Veteran

Plainfield, IN

My Posts: All  Forum  Topic

Well it worked. But not how I expected to. I never did get a connection to the Vcontrol manager but I left it connected and clicked on the app page for the Neo. There it showed the green check and that Pro had been installed. I power cycled everything and connected the Vcontrol. The Vbar under model status shows Vbar Pro 6.2.243...

Everything looks as it should now! Thanks for the input fellas!

Lou

Five dudes and two flashbangs...

08-19-2016 01:10 AM
PM  EMAIL  GALLERY  Attn:RR
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

Keyfile not driver install is not needed for updates (when using the manager). Those are only needed for usage of the PC software for setup. All you need is the new manager, boot plug installed, and power

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

08-19-2016 02:34 AM
PM  EMAIL  GALLERY  Attn:RR
WATCH  1 page 209 views POST REPLY
Thunder Power RC AlignRC
 Print TOPIC Advertisers 

 5  Topic Subscribe

Sunday, September 25 - 8:05 pm - Copyright © 2000-2016 RunRyder   EMAILEnable Cookies