RunRyder RC
 5  Topic Subscribe
WATCH  1 page 190 views POST REPLY
Thunder Power RC AlignRC
CostaRicaHeli

Heliman

Costa Rica, Central America

My Posts: All  Forum  Topic

Hi guys,

I ran out of ports on my AR8000 and wanted to try a Switchglo Pro. Can I use a Y harness for the battery and the Switchglow Pro into the Bind Data port? Does the Tx have a channel/switch assignment for the Bind Data port? I would need to turn it on and off. My Tx is the DX18.

Thanks,

Franz

08-17-2016 07:34 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
CostaRicaHeli

Heliman

Costa Rica, Central America

My Posts: All  Forum  Topic

Anyone? Thanks!

Franz

08-19-2016 02:07 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
balsapro

Veteran

Gallatin,TN

My Posts: All  Forum  Topic

No I don't think so.... If your short on Channels just y it into the throttle channel.

Won't have independent switch but will cut on/ off with the throttle stick.

Build the Best, Fly the Best, Crash the Best

08-19-2016 04:01 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
old nitroman

Senior Heliman

Naples florida

My Posts: All  Forum  Topic

or you could use a mix throttle channel

E5s and E7se Building Roban bell 222 800 superscale

08-19-2016 04:14 PM
PM  EMAIL  GALLERY  Attn:RR
CostaRicaHeli

Heliman

Costa Rica, Central America

My Posts: All  Forum  Topic

Thanks guys. What is a mix throttle channel?

Franz

08-19-2016 06:15 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
Dawiev

Senior Heliman

Middle East

My Posts: All  Forum  Topic

Definitely not.

Which FBL, Receiver and Tx? What have you got plugged into the Aux ports?

08-19-2016 07:39 PM
PM  EMAIL  Attn:RR
CostaRicaHeli

Heliman

Costa Rica, Central America

My Posts: All  Forum  Topic

Spektrum DX18 Tx and AR8000 Rx. Its a flybared heli. The GV1 takes 3 channels (throttle, on/off and RPM), the Gyro takes two (rudder and gain) the cyclics take three (ele, ail, pitch). That's 8. Its an 8 channel receiver so...I guess I'm out of luck with the Switchglo Pro unless I Y it with the throttle or something.

I'll see if I can get another receiver with more channels.

Thanks,

Franz

08-19-2016 07:46 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
Dawiev

Senior Heliman

Middle East

My Posts: All  Forum  Topic

Does the On/Off for the GV1 use the signal pin, or only takes power from the port?

08-19-2016 08:11 PM
PM  EMAIL  Attn:RR
CostaRicaHeli

Heliman

Costa Rica, Central America

My Posts: All  Forum  Topic

I would assume it uses the signal pin because it does turn it on and off. The three pins are on the connector.

Franz

08-19-2016 10:14 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
CostaRicaHeli

Heliman

Costa Rica, Central America

My Posts: All  Forum  Topic

Used a bigger reciever and works well. Thanks for the input guys!

Franz

08-22-2016 10:07 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH  1 page 190 views POST REPLY
Scorpion Power Thunder Power RC
 Print TOPIC Advertisers 

 5  Topic Subscribe

Tuesday, September 27 - 1:11 am - Copyright © 2000-2016 RunRyder   EMAILEnable Cookies