RunRyder RC
 2  Topic Subscribe
WATCH  1 page 258 views POST REPLY
Scorpion Power AlignRC
THX1138

Elite Veteran

Camp Bondsteel, Kosovo

My Posts: All  Forum  Topic

This is my first set up with the Vcontrol.

I am using a full size Blueline with the Vcontrol satellite. I have searched all over the V-stabi webpage and I can't seem to find info for the physical connections. I am using a Mikado edition YGE 160 Xxtreme. This was all a good working set-up in my rave ballistic.

Currently, I have the sensor plugged in to sensor II input and the ESC is plugged into the ESC/Collective.

Any input would be appreciated, thanks.

Lou

Just give me five dudes and two flashbangs...

08-13-2016 05:02 PM
PM  EMAIL  GALLERY  Attn:RR
cudaboy_71

Elite Veteran

sacramento, ca, u.s.

My Posts: All  Forum  Topic

Is this what you're after?

http://www.vstabi.info/en/node/641

Connection is just regular Vbar setup. Nothing different except plugging in the satellite is not referenced on these pages. But servo and ESC inputs and outputs are the same.

It's also listed on p17 of the control manual:

if it ain't broke, break it.

08-13-2016 06:18 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
THX1138

Elite Veteran

Camp Bondsteel, Kosovo

My Posts: All  Forum  Topic

That part I got right...

I tried the YGE ESC set up in the Vcontrol. As soon as I entered the set up, the motor spooled up. It did the same thing when I chose "other ESC". I'm sure it's something simple but is can find it in the manual.

Lou

Just give me five dudes and two flashbangs...

08-13-2016 08:22 PM
PM  EMAIL  GALLERY  Attn:RR
cudaboy_71

Elite Veteran

sacramento, ca, u.s.

My Posts: All  Forum  Topic

Only YGE I've ever used was not the Mikado pre-programmed one. Not sure if you have one of those or not. But, in my case I programmed it manually with the prog card. Never had any issues once endpoints were set. But, I've also never used a YGE with the Vcontrol...so, I can't offer much help.

if it ain't broke, break it.

08-13-2016 09:51 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
THX1138

Elite Veteran

Camp Bondsteel, Kosovo

My Posts: All  Forum  Topic

Right on. Mine is the pre-programmed one that was sold with the 800. It works really. I'm just not sure on the Vcontrol set up, lol. Thanks for the effort bro.

Lou

Just give me five dudes and two flashbangs...

08-13-2016 09:56 PM
PM  EMAIL  GALLERY  Attn:RR
THX1138

Elite Veteran

Camp Bondsteel, Kosovo

My Posts: All  Forum  Topic

I'm not sure what the difference was but as soon as I switched to the Neo, the YGE calibrated as advertised in the Vcontrol ESC setup and has been working perfectly.

Lou

Just give me five dudes and two flashbangs...

09-03-2016 01:37 PM
PM  EMAIL  GALLERY  Attn:RR
WATCH  1 page 258 views POST REPLY
Thunder Power RC ProModeler
 Print TOPIC Advertisers 

 2  Topic Subscribe

Wednesday, December 7 - 10:12 pm - Copyright © 2000-2016 RunRyder   EMAILEnable Cookies