RunRyder RC
 3  Topic Subscribe
WATCH  1 page 258 views POST REPLY
ProModeler Scorpion Power
plakkertje

Senior Heliman

belgium

My Posts: All  Forum  Topic

Hi,
what kan be done to make heli roll faster in an rolling stal turn at the moment that it is rollin at 90 deg.?
roll rate in the swasch is at 500(max)
v2.0
When i do an horizontale roll it is rolling fast but when it is at 90 deg. I woud like to make it roll faster.
i have this with an align dominator 700l(2000rpm) and my goblin 700kse.(1900rpm)
thx!

07-30-2016 07:41 PM
PM  EMAIL  Attn:RR
don s

Key Veteran

Chesapeake, VA

My Posts: All  Forum  Topic

Higher headspeed, faster servos.

E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.

07-30-2016 08:59 PM
PM  EMAIL  GALLERY  Attn:RR
plakkertje

Senior Heliman

belgium

My Posts: All  Forum  Topic

Okay, but why dos it roll faster flat than at 90' ?

07-30-2016 09:24 PM
PM  EMAIL  Attn:RR
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

Servos speed is not the issue here.

What blades, how much static cyclic measured in sws.rate, and what is the gyro measuring for pitch and roll rate (it's in the home screen).

Setting cyclic rate at 500d/s is useless if the rotor system can't produce it.

Ben Minor

Team Synergy Team Futaba Team Kontronik USA
Progressive RC

07-30-2016 10:20 PM
PM  EMAIL  GALLERY  Attn:RR
plakkertje

Senior Heliman

belgium

My Posts: All  Forum  Topic

Sws rate at 9deg like manual suggest
edge 690 on trex, 12,5-13 deg pitch
Thunderbolt 960 blades on the kse, 13,5 deg pitch
again why dos the helis roll fast flat and not at 90 deg?
thx

07-31-2016 04:03 AM
PM  EMAIL  Attn:RR
plakkertje

Senior Heliman

belgium

My Posts: All  Forum  Topic

If i understand it , if i make it 10deg it choud roll faster?
what happens when rate is to high?
thx

07-31-2016 09:27 AM
PM  EMAIL  Attn:RR
plakkertje

Senior Heliman

belgium

My Posts: All  Forum  Topic

Ok problem solved,more swasch rate was the answer...

07-31-2016 09:16 PM
PM  EMAIL  Attn:RR
WATCH  1 page 258 views POST REPLY
AlignRC Thunder Power RC
 Print TOPIC Advertisers 

 3  Topic Subscribe

Monday, December 5 - 8:37 pm - Copyright © 2000-2016 RunRyder   EMAILEnable Cookies