RunRyder RC
 1  Topic Subscribe
WATCH  1 page 83 views POST REPLY
Scorpion Power AlignRC
bgymr

Heliman

Pennsylvania

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

Works great and looks great. Comes with the pictured horn (new) and screw. There is no slop, it was used on a 425mm blade heli, so it's had a really easy life.

I ship same day payment clears. Check my feedback!!!

FEATURES:
4096 super high resolution
Water-Resistant with 4 silicone seals
Coreless motor brings output performance to new levels - smoother, faster and more efficient operation.
The metal case design not only looks awesome but also allows for cooler and smoother operating temps.
Our servos are totally green – from materials to production, these servos are environmentally friendly.
Ideal as a rudder servo on 500, 600, and 700 class helis.

TECHNICAL SPECS:
Dimensions(mm): 40.3x20.2x37.2
Weight(g): 56.4
Speed(@4.8V sec/60): .06
Torque(@4.8V oz-in): 55.5
Speed(@6.0V sec/60): .05
Torque(@6.0V oz-in): 69.4
Gear: Metal
Bearing: 2BB
Case: Aluminum
Running current (at no load): 200 mA @ 4.8V
Running current (at no load): 250 mA @ 6.0V
Stall current (at locked): 2.4 A @ 4.8V
Stall current (at locked): 3.0 A @ 6.0V
Idle current (at stopped): 5 mA @ 4.8V
Idle current (at stopped): 5 mA @ 6.0V
Connector wire gauge: #22 AWG
Connector wire length: 300 ±5 mm
Horn gear spline: 25T
Control system: Pulse width modification
Amplifier type: Digital Controller
Operating Travel: 100° (when 1000→2000 μsec)
Neutral position: 1520 μsec
Rotating direction: Counterclockwise (when 1500→2000 μsec)
Pulse width range: 800→2200 μsec
Maximum travel: Approx 154° (when 800→2200 μsec)

06-28-2016 04:24 PM
PM  EMAIL  GALLERY  Attn:RR
WATCH  1 page 83 views POST REPLY
Thunder Power RC ProModeler
 Print TOPIC Advertisers 

 1  Topic Subscribe

• CLASSIFIEDS HELP-FAQ Buyer beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Saturday, December 3 - 4:35 am - Copyright © 2000-2016 RunRyder   EMAILEnable Cookies