RunRyder RC
 4  Topic Subscribe
WATCH  1 page 1209 views POST REPLY
Heli-Max Scorpion Power Thunder Power RC
RACER7696

Senior Heliman

Ma

My Posts: All  Forum  Topic

where can I find some kind of holder to hold the bevel box.either for the blades them selves or to attach to the blade grips I thought ive seen them somewere

09-29-2012 Over year old.
PM  EMAIL  GALLERY  Attn:RR
honda411

Key Veteran

Surprise, AZ USA

My Posts: All  Forum  Topic

also use a velcro strap

HeliDirect Field Rep, Synergy N7 w/ OS 105, Torq Servos, Cyclone/ Rail blades

09-30-2012 Over year old.
PM  EMAIL  GALLERY  Attn:RR
RACER7696

Senior Heliman

Ma

My Posts: All  Forum  Topic

so there is no such holder out there

10-04-2012 Over year old.
PM  EMAIL  GALLERY  Attn:RR
ssrobzoom

Key Veteran

Tn

My Posts: All  Forum  Topic

10-04-2012 Over year old.
PM  EMAIL  GALLERY  Attn:RR
mr dan

Veteran

Stockton Calif

My Posts: All  Forum  Topic

That bevel box holder works great! But if you are in a pinch, try this method:

If your blade grips are flat on the top and bottom this method will work out for you.
place a strip of double sided tape on the bottom of the bevel box, (you can get this tape at a hobby and craft shop, its as thin as gift wrap tape) next place the box on top of the Blade grip and proceed to adjust your pitch ranges.

"R.I.P Roman" Citizen 0094 in the Nation

10-04-2012 Over year old.
PM  EMAIL  GALLERY  Attn:RR
JJMAN (passed)

Veteran

Chesapeake, Virginia - USA

My Posts: All  Forum  Topic

I JB Welded a blade grip screw to the bottom of mine, just put it in the blade grip and a nut on the bottom.

JAY HIGGS

10-05-2012 Over year old.
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
RACER7696

Senior Heliman

Ma

My Posts: All  Forum  Topic

good idea on the screw. However will the freakweare company ship to the us

10-05-2012 Over year old.
PM  EMAIL  GALLERY  Attn:RR
bart2546

Veteran

Canal Winchester, OH - USA

My Posts: All  Forum  Topic

I was playing around on the site last night and you can change the website language to English and they will ship to the U.S. but be prepared, unless you're using DHL it's about 75 bucks or more for FedEx and UPS just to ship on top of the 30 bucks for the bevel holder. DHL costs around 23 to ship.

Regards, Brandon Bartolomucci; Team Synergy; Team Scorpion; & Team Bavarian Demon; AMA# L939231

10-05-2012 Over year old.
PM  EMAIL  GALLERY  Attn:RR
JJMAN (passed)

Veteran

Chesapeake, Virginia - USA

My Posts: All  Forum  Topic

10-05-2012 Over year old.
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
kenb

Heliman

cloquet, minnesota carlton

My Posts: All  Forum  Topic

digital pitch gauge

Two 7/16 nuts gooped onto a flybar paddle gauge. Harbor freight digital gauge has magnets built into the bottom of it and attaches itself to the nuts. Set the gauge itself on top of the rotor head to zero it. Works good! Comments?

01-13-2013 Over year old.
PM  EMAIL  GALLERY  Attn:RR
WATCH  1 page 1209 views POST REPLY
Futaba-RC JR AMERICAS Heli-Max
 Print TOPIC Advertisers 

 4  Topic Subscribe

Tuesday, July 26 - 1:39 am - Copyright © 2000-2016 RunRyder   EMAILEnable Cookies