I just recently bought a "pre-owned" Miniature Fury Extreme that had a hard landing. It needs a boom, spindle shaft, flybar, etc. Is there anything else I should look for? Is there anything I should inspect that might not be crash related? I have 3 Trex 600n's, but this seems like a different animal (and more expensive!!!).

Check the main shaft, tail output shaft, check/re-grease all the bearing.While you have it apart re-lube the sprag bearing also.

Prices for MA has gone down some. You can't compare a Fury, a full blown 3d machine to a 600n a mass market appeal helicopter. You will see the difference once yo fly it.

You can't compare a Fury, a full blown 3d machine to a 600n a mass market appeal helicopter. You will see the difference once yo fly it.

That made me grin!!

Also look at the crown gear..
Goodluck with your Cadillac in the sky..... that is the helicopter that will separate the men from the boys.......

when you set it up , line up everything 90` to the main shaft..
don`t eyeball it. use a large plastic see through square

Jason's keeping it real!

Real old school!

Miniature Aircraft USA

i love my fury extream u will too..very reliable heli.

team SRW brooklyn