RunRyder RC
 4  Topic Subscribe
WATCH  1 page 2323 views TOPIC CLOSED
Thunder Power RC Futaba-RC JR AMERICAS
AirFoil Aerial SystemsKey Veteran - IL. - My Posts: All  Forum  Topic

Designed to fit almost any Quad or T-Copter. Used on our Q-700Pro/Q-800Pro Quad Copter’s

Both mounts use pan/tilt and roll. Both are shipped assembled as shown ready to use.

360 degree pan 7-1 ratio
180 degree tilt with 360 degree servo using release clutch system to eliminate servo or camera damage from hard landing.
6” roll compensation.

Camera’s can be 1-6lbs per Quad payload.
The 700 mount dry. 24ozes. (as pictured less camera and downlink system) Will accept up to a basic DSLR 1-3lb. camera’s

The 800 mount dry. 28ozes . Will accept camera’s up to 6lb’s

Cost for the Q700ProM $690.00 plus shipping

Cost for the Q800ProM $780.00 plus shipping

Both require drilling 4 holes per jig then mount to aircraft.
Shown with T2I/900mhz video down link system not included.

Shipping after the order is slotted 3-5 days.

04-27-2012 12:29 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
UAVProducts

Senior Heliman

Mchigan, USA

My Posts: All  Forum  Topic

Both require drilling 4 holes per jig then mount to aircraft.
The holes will have to be drilled in the camera mount adapter plate not the DJI frame. The reason is the bottom frame plates are Power Dist. Boards also. So you CAN'T drill thru them. There are slots that you could use to mount your setup on. You will have to make the adapter plate fit those. It will be pretty easy to do.

On the S800, it will be coming with Retractable landing gear as standard soon, so I doubt people will want to put that aside.

Might want to make a gimbal only version for the S800

Robert
N.A. Dist for DJI
N.A. Dist. for PhotoHigher
Formerly DJIUSA

04-27-2012 01:02 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
Zapataantonio

Heliman

Puerto rico

My Posts: All  Forum  Topic

Hello do you have any videos from the f550 with the gimbal? I would like to see how it works in the air. Can you also sell it with the mounting plate?thanks

04-27-2012 09:21 PM
PM  EMAIL  GALLERY  Attn:RR
Zapataantonio

Heliman

Puerto rico

My Posts: All  Forum  Topic

Hve you tested with the gopro. It think landing gear will affect image.

04-27-2012 09:24 PM
PM  EMAIL  GALLERY  Attn:RR
AirFoil Aerial Systems

Key Veteran

IL.

My Posts: All  Forum  Topic

I've never flown a 550 quad as we manufacture units ourselves.
The mount is designed to fit a 550. If the quads smooth I would expect good quality video.

Using a GoPro you would need to move the camera to the front hole to give the camera a clear view between the skids.

This is on our Quad shooting with a T2I using the 700 mount.

Watch at YouTube

It's this unit shooting the video

04-27-2012 10:19 PM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
patrick21x

Heliman

Costa Mesa , CA

My Posts: All  Forum  Topic

The Stock DJI 550 will not lift this gimbal and DSLR Safely. Also, You DO NOT want to use stock DJI props with any type of camera gimbal load. They are very well known for breaking. If you want to carry larger camera gimbals and such, you may want to consider getting the F550 Heavy Lift conversion. That way you can run larger motors and props. Then you can carry a nice size gimbal and camera.

As mentioned above, DO NOT DRILL THROUGH the bottom of the 550 Board. It is a circuit board, and placing bolts through it will complete the circuit, Releasing allot of Magic Smoke lol.

04-27-2012 11:19 PM
PM  EMAIL  HOMEPAGE  Attn:RR
Zapataantonio

Heliman

Puerto rico

My Posts: All  Forum  Topic

I ordred graupner 10x5 props. And i will lift a gopro and a nex5. How much dose the heavy lift kit cost? I been looking for a good gimbal but haven decided wish one to buy.

04-27-2012 11:29 PM
PM  EMAIL  GALLERY  Attn:RR
AirFoil Aerial Systems

Key Veteran

IL.

My Posts: All  Forum  Topic

I want to make sure individuals getting into aerial imaging aren't mislead.
Drilling though a circuit board is no problem if the battery is not connected. Then a derlin T insert is used to eliminate the chance of shorting a circuit when connecting the camera mount or any other item.

04-28-2012 12:07 AM
PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH  1 page 2323 views TOPIC CLOSED
Heli-Max Scorpion Power Thunder Power RC
 Print TOPIC Advertisers 

 4  Topic Subscribe

Tuesday, June 28 - 2:10 pm - Copyright © 2000-2016 RunRyder   EMAILEnable Cookies