Topic Subscribe
WATCH  1 page1766 viewsPOST REPLY
Heli-Max . Scorpion Power System . Ron's RC Helicopters
. .

e-
MSH Protos, Mini Protos
 >

protos 500 specs my new heli

piranhafreak

Veteran

Manahawkin NJ

Just trying to get an opinion on my new setup protos 500 yge 60amp esc scorpion motor 880kv 430mm sab blades align 510m cyclic servos align ds620 tail servo gy520 gyro i have never flown a protos and just curious on how this setup should be i will wait till the build is finished to figure what lipo size will balance the heli the best then i will by my lipo after i weigh everything

Mabey one day i will actually land one of these things !!

02-20-2012 Over year old.
baby uh1

Veteran

St. James, Mo.

Depending on what pinion and cell count you are planning to run it could be a very hot ship!

Anything is possible if you don't know what you are talking about!

02-20-2012 Over year old.
rcnut

Elite Veteran

Rockford, Illinois

Dude...this heli rocks!!! I'm using 2600 3300mAh packs, and the balance is fine. My head speeds are 2300 & 2800 rpm in idle 1&2.i

The Protos 500 is very light in the air, fast, and moves with very little effort. It is very quite, basically all you hear is the blade noise. It feels like that of a 50-60 size heli...not quite a 90 size, but somewhat.

"I love the smell of Nitro in the morning!"..."RIP Roman"

02-20-2012 Over year old.
RCSavager

Key Veteran

Topeka, KS

You should try a 470mm setup. Running the same headspeeds you quoted this thing is freaking scary fun to fly. As loud as the blades can be it'll be all you want to hear anyway. OP, your setup should do more than just adequate. That thing will likely change your heli religion.

Once you try steak, is hard to go back to hotdogs.

02-20-2012 Over year old.
HOMEPAGE  
integy2

Veteran

California USA

+1 on all good things about Protos.

Protos 500 is a lipo hungry. Try to get highest C rate that u can get on your lipo.
2600mAh - 3000mAh.
She just sit in my office right now.


(Good flight end up with ...... big smile :D)

02-20-2012 Over year old.
HOMEPAGE  
CX1

Key Veteran

Canada

absolutely love my protos
and your set-up will do just fine

" Team Protoast "

02-20-2012 Over year old.
HOMEPAGE  
Richardmid1

rrProfessor

Leeds, England

Love mine also, only down side to stock setup has been mentioned, li-po hungry! This is partly due to the SAB 430's which are power hungry but mostly the high gearing. I have dropped mine to a 14T and added some Align 425D 3G blades which are not only more efficient but more resposive too (if you like that sort of feel). Still only getting 3.5 mins out of 2700's.

60% of the time, it works every time!

02-20-2012 Over year old.
HOMEPAGE  
CX1

Key Veteran

Canada

getting 5 mins with the 13t pinion ,90% flatline
if you don't mind the lower headspeed

" Team Protoast "

02-20-2012 Over year old.
HOMEPAGE  
Richardmid1

rrProfessor

Leeds, England

I think with FBL and the tail power on the Protos being so good there is no need for crazy headspeeds.

60% of the time, it works every time!

02-20-2012 Over year old.
HOMEPAGE  
McRex

Veteran

Halls, TN-USA

Piranhafreak- that's pretty much the same setup I started with on my Protos, only difference was 9254 on the tail, it was sick, 3:30 minutes of 3D at 2850rpm. I've since done the stretch kit and flybarless mod on mine, with the AR7200BX and it's even more fun!

Cheers,

Daniel, AMA # 923248

06-13-2012 Over year old.
WATCH  1 page1766 viewsPOST REPLY
Thunder Power RC . Mikado . Futaba-RC
. .

e-
MSH Protos, Mini Protos
 >

protos 500 specs my new heli

 Print TOPIC Advertisers 

Topic Subscribe

Saturday, October 25 - 12:08 am - Copyright © 2000-2014 RunRyder   EMAILEnable Cookies