Topic Subscribe
WATCH  1 page1269 viewsPOST REPLY
Boca Bearings . ExperienceRC . JR AMERICAS
. .

Align T-REX 600N 700N

 >

trex550E converted to 550N

abdulbasit

Heliman

Oman

Hi,
I would like to share this with all of you... managed after modification done to mount the 500 nitro kit to 550 & below photos would give some ideas for those interested in converting the E kit to N kit... simply put 5mm spacerís in between the engine mount and frame, use extra elevator opening for throttle 610servo, get one fix wing fuel tank & donít forget to change the pinion gear use the one supplied be align I used 16T.

Tested the Heli & really preformed very well... tried many 3D maneuvers Ö really flyís very nice.

Thatís all for know ... Enjoy

Abdul

02-14-2012 Over year old.
Nycatt

Elite Veteran

New York

Very Nice Job.




CYCLONE BLADES
TEAM HELIPROZ

02-14-2012 Over year old.
HOMEPAGE  
rilopez825

Veteran

Pembroke Pines, FL

A video would be nice.

Richard

02-14-2012 Over year old.
jgunpilot

Key Veteran

Pollock, LA

It seems like it would be a CCPM update to a Raptor .30. It would be a great use for all those discarded 500N units peple have sitting around in their shops.

02-14-2012 Over year old.
rspiegel

Veteran

Austin,TX South Buda

Motor

What Motor?

02-14-2012 Over year old.
jgunpilot

Key Veteran

Pollock, LA

OS .37 comes with the 500N unit. They run great, easy to tune and reliable as death and taxes.

02-14-2012 Over year old.
Eco8gator

Elite Veteran

Palm Beach, FL

Im surprised align hasnt come out with this machine.

The 550 is stupid light and would probably rock on a 37 engine!!!

Put a 50 sized tank on it and youll be in the air for a long time

Carlo

Xera Motors
ProBar
Minicopter
Thunder Power

02-15-2012 Over year old.
RCHELILOVER

Heliman

augusta, ga

Cool! What does the final gear ratio end up being? Just got one and need to set up my governor Thank you!

02-28-2012 Over year old.
abdulbasit

Heliman

Oman

Hi,
what I have used is 16T pinion gear & the main gear is 170T... gear ratio will be 10.6 & the RPM will around 1698, but it would be much better to use 20T to 22T pinion gear to be able of getting better RPM & performance the RPM will be above 2300 which is very good for hard 3d.

Best regards
Abdul

02-28-2012 Over year old.
BlakeMcBrayer

Elite Veteran

Georgetown, Ky

That looks pretty cool. My only question is, does the nitro kit come with the wire afro for the back? Or did you just add the afro kit?

Don't come off the throttle untill you see your GOD!

03-04-2012 Over year old.
abdulbasit

Heliman

Oman

This kit was battery operated & the kit used here is for 500, all what you can see is because of no enough space therefore, decided to put all wires that way.... I saw 550 with 50 size engine I tried to fix but one thing stoped me doing that, the frame will be completely spoiled as you will have to cut & extend it @ the front.

Best regards
Abdul

03-04-2012 Over year old.
BlakeMcBrayer

Elite Veteran

Georgetown, Ky

I have a 550 and realize the wiring nightmare that the nitro kit would create. I just could not pass up the chance to poke a little. No harm intended.

Don't come off the throttle untill you see your GOD!

03-04-2012 Over year old.
WATCH  1 page1269 viewsPOST REPLY
HeliDirect . Heli-Max . Scorpion Power System
. .

Align T-REX 600N 700N

 >

trex550E converted to 550N

 Print TOPIC Advertisers 

Topic Subscribe

Friday, August 22 - 8:39 pm - Copyright © 2000-2014 RunRyder   EMAILEnable Cookies