I installed my 1.3gig 300mw transmitter on my quad which is running the DJI WooKong M. Normally when in GPS mode I have rock solid hovering. When I turn the transmitter on the quad drifts quite a bit and the Strobe is giving me the white light blinking intermintently along with the normal GPS color. Any Ideas do I need to change to a different freq on the transmitter?

I would move the transmitter lower and away from the DJI unit .. maybe attach it to the landing strut near the end.

Dr.Tim

From Simple minds come simple ideas! Approach Engineering, Aerial TEch Systems , X468

I'll give that a try tomorrow and see what happens.

After looking at your setup a little closer I would put it below the GoPro ..

From Simple minds come simple ideas! Approach Engineering, Aerial TEch Systems , X468

On the same plate that holds the gopro?

What lens is that on the Go Pro?

"Gotta Luv It".

It is a filter holder that I got from aquaprohd.com. It is made for underwater use but I'm using it for UV filter and or a polarizing filter. It is mounted to the case and not the camera.

Nice setupup !
I'll be watching for your updates as this is the similar setup I wanna try this spring...

.

Tim

Moved the Transmitter to the landing gear and no more interferance to the GPS in the WKM.

From Simple minds come simple ideas! Approach Engineering, Aerial TEch Systems , X468

your running an x650!!! what motors and escs are you running.