RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 929 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page513 viewsPOST REPLY
XHELI.COM . Autography FlightPower . Advantage Hobby

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > Shuttle ZXX`
 
 
Ralph
Senior Heliman
Location: CT

My Posts This: Topic  Forum		Hello,
I'm trying to setup my Shuttle ZXX for aerobatic/mild 3D and autorotations. I'm have a difficult time getting +/- 10 degrees collective and a cyclic input of +/- 6 degrees. With the stock setup it appears inpossible to get more than +9.5 degrees collective. Is that enough for autos? Please forward and tips/techniques.

Thanks,
Ralph
03-22-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
King Cobra
Veteran
Location: Virginia. USA.

My Posts This: Topic  Forum		Becareful

With Zxx all you could do is -6 to 9 or 10 degree, make sure there is no slop or play thought out the machine uncluding bearing and paid a lot attention to the tail mechanism, It will do mill 3D but keep it distance in case it blow up to piece. -6 you could do loop, roll and it time to get some thing else while you ahead.
03-22-2002 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
1 page513 viewsPOST REPLY
Revolution Models . CarbonXtreme . Midland Helicopters

.
.
HIROBO Turbulence - SDX - Freya - Sceadu > Shuttle ZXX`
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 9:32 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF