RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 871 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page511 viewsPOST REPLY
HeliProz . Ron’s HeliProz South . MTA Hobbies

.
.
Gasser Model RC Helicopters > Rc230 throttle butteryfly shaft.Benzin
 
 
TVAILLANCOURT
Senior Heliman
Location: Edmonton Alberta Canada

My Posts This: Topic  Forum		Who makes the longer shaft to run the linkage to the bottom of the carb,or is there just the control arm for it.I've seen some pictures of guys running their throttle from the bottom on their Benzins but can't remember who.
This is for a Benzin CCPM purple frame set.
Thanks
07-22-2003 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Naomi
Elite Veteran
Location: Ontario, Canada

My Posts This: Topic  Forum		check this page.

http://runryder.com/helicopter/t42270p1/?top=1058857268

Naomi
07-22-2003 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
kremlin
Heliman
Location: N.W. VA

My Posts This: Topic  Forum		TVAILLANCOURT

I run the throttle on the bottom with the stock 603 that came on the motor. The throttle arm came in the kit from Vario. It will fit between the lower frame plate and carb body with the ball up. I do not understand how you got the arm on top. If you swapped the carb from top to bottom to get the linkage on top the pulse port is not drilled thru on the carb adapter. I hope this helps.

PS. I have the Airstar side frames


Brian
07-22-2003 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
TVAILLANCOURT
Senior Heliman
Location: Edmonton Alberta Canada

My Posts This: Topic  Forum		My kit never came with that throttle arm for the bottom.As far as I know all the RC230 engine come stock with that silver cresent shape spring tesion arm on the top.Does someone have a part number for that throttle arm extesion for the bottom?
Thanks
07-23-2003 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Billme
Elite Veteran
Location: MS

My Posts This: Topic  Forum		Your going to have to replace the whole shaft if it has been cut to short...
Has it been cut? or you just need a arm...You can make those out of 30ths sheetmetal, and silver solder it to a wheel collor..
Bill
07-23-2003 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
helicenter
Veteran
Location: Winter Haven Fl.

My Posts This: Topic  Forum		throttle

I use the throttle arm for an XCell gas, it fits just below the airstar bottom plate.

Doug
07-23-2003 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
TVAILLANCOURT
Senior Heliman
Location: Edmonton Alberta Canada

My Posts This: Topic  Forum		No the shaft has not been cut.I simply drilled the little hole in the bottom of the short bit just past the e-clip and thread it.My problem is getting something long enough to clear the frame enogh to accept a ball.
I may try the wheel collar and silver solder method.Can you silver solder 2 wheel collars together too get the length.I just don't trust it will stay together.Will experiment a bit.Thanks for the idea's.Can some one send me a picture of your throttle linkage from the
Gotime@telus.net
Thanks
07-23-2003 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Naomi
Elite Veteran
Location: Ontario, Canada

My Posts This: Topic  Forum		Perhaps you should try BrianS.. ask how he did it?

Naomi
07-23-2003 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Mark222
Senior Heliman
Location: Kelowna, B.C. Canada

My Posts This: Topic  Forum		Billme suggested using an aluminium JR throttle arm from an Ergo Z230, part #JRP970123. The ball end of the arm needs to be filed down to 1/16" then it will fit between the frame plate and the bottom of the carb. I did this and it works great!

TV

On Aug 2nd & 3rd, the "Kelowna Ogopogo Radio Controllers" are hosting the "Third Annual Heli Extravaganza" in Kelowna B.C. There will be at least three flyers with the "Benzin CS". Vince had emailed you but the emails kept coming back. Hope you can make it. All are welcome to join us. The club web site is; www.korc.ca

Mark G.
07-24-2003 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Billme
Elite Veteran
Location: MS

My Posts This: Topic  Forum		I have said this before: that if you do not make your geometry correct on the throttle, your heli engine will never run right, same on glows, but its twice as critical on a gasser...When you put the throttle on the top butterfly indicator, you better know what your doing....Its almost impossible to get it correct...This is why I highly suggest mounting the arm on the bottom so as to get the correct angles throws, with the butterfly in the right position..
Many Regards,
Bill
07-24-2003 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page511 viewsPOST REPLY
Model Rectifier Corp . ReadyHeli . Power Helis

.
.
Gasser Model RC Helicopters > Rc230 throttle butteryfly shaft.Benzin
 
 
TVAILLANCOURT
Senior Heliman
Location: Edmonton Alberta Canada

My Posts This: Topic  Forum		Mark222, Yeah I'll be there for Kelowna fun Fly.See ya there.
Thanks for the other info on the throttle arm as well guys.
07-25-2003 Over year old.
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page511 viewsPOST REPLY
HeliProz . Ron’s HeliProz South . MTA Hobbies

.
.
Gasser Model RC Helicopters > Rc230 throttle butteryfly shaft.Benzin
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 11:38 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF