RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 731 ONLINE 80 EVENTS SEARCH REGISTER  START HERE
 
1 page274 viewsPOST REPLY
Ron’s HeliProz South . MTA Hobbies . Model Rectifier Corp

.
.
Align T-REX 600N 700N > T-REX 600N Extra Parts In 600N Kit?
 
 
aviansapien
Heliman
Location: albany, ny - usa

My Posts This: Topic  Forum		I am building my 600N Belt and have two leftover black plastic hexbolts (like those that go in the tailboom mount or fan housing.) Please tell me they are extras and I don't have to start dismantling. I can't find any other place for them to go. I just installed my servos and tail tonight.
Do these kits have any left over parts when complete?

Thanks.
11-16-2009 02:13 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
george0079
Elite Veteran
Location: Terra Firma

My Posts This: Topic  Forum		Yes. There are extra parts in the kit.

Hell... I can fix that.
Uh oh..
Nope.
It's ***ked!!!
RE-KIT!!!!!
11-16-2009 02:18 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
jasnlemons
Veteran
Location: upstate, SC United States

My Posts This: Topic  Forum		They do that just in case you drop something and can't find it. I put all mine in a case and saved for the next time I needed an extra screw.

Fly it like you stole it!
Stick Banging Expert

Team Magnum Fuels
11-16-2009 12:22 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
aviansapien
Heliman
Location: albany, ny - usa

My Posts This: Topic  Forum		Thanks, but....

Specifically, did anyone else have those plastic hex bolts (look more like long plastic hex nuts) left over?

I am trying to figure out if I somehow left them out during my build.

Thanks again.
11-16-2009 08:16 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
lightningrc
Elite Veteran
Location: UK

My Posts This: Topic  Forum		Theres some like that which go in the fan shrouds also.
11-16-2009 11:35 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE  
 
 
aviansapien
Heliman
Location: albany, ny - usa

My Posts This: Topic  Forum		Getting there.... I think

I checked and all of my screws torqued down good in the fan shroud and tail assemblies (where they connect to the side frames). Am I correct in thinking they would have nothing to thread into if I left out the inserts?

Sorry for the dumb questions, but this is my first heli build and I am probably being too careful and over thinking everything.

Thanks again, I appreciate all of your help and hints so far.
11-17-2009 01:52 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Quickster
Veteran
Location: Victoria, Australia

My Posts This: Topic  Forum		Yes i had two of them left over in both my 600N kits i have had!
11-17-2009 06:44 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
aviansapien
Heliman
Location: albany, ny - usa

My Posts This: Topic  Forum		Thank You!

You have totally made my day! I was dreading having to dismantle the heli after having CAed all of the screws. Now I can finish my servo installation. What a great community.
11-17-2009 02:41 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Simmer
Key Veteran
Location: Massachusetts

My Posts This: Topic  Forum		you can use one of those for a standoff for a header tank if you run one. Cut to size and bolt to the screw under the tank (one of the mount screws for the frame/landing gear) or some have used one of the bolt holes from the lower bearing block, and some have made a new hole altogether.
11-17-2009 05:09 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Andy from Sandy
Key Veteran
Location: UK

My Posts This: Topic  Forum		Hi, I have just put a 600 sport together. Align call them mounting bolts. In the cooling fan shroud the hex mounting bolts were actually 6mm too short. No mention in the manual but I came across the longer ones in the bag with the cable ties and other odds and sods. So yes, I have two hex mounting bolts left over but they are no use for anything on the model!
11-21-2009 10:17 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page274 viewsPOST REPLY
EDGE Rotorblades . ReadyHeli . Power Helis

.
.
Align T-REX 600N 700N > T-REX 600N Extra Parts In 600N Kit?
 Print TOPIC Advertisers 

Subscribe to This Topic

Sunday, March 21 - 2:15 am - Copyright © 2000 - 2010 runryder.com | email | link to rr | START HERE | NF