PaulGT3
Senior Heliman
Location: Mammoth Lakes Ca
My Posts This: Topic Forum | I found that my plastic fly bar support was the old
one and had snapped in half. It wasnt obvious without
pulling the flybar apart. I would have never
found it had I not received the update kit. I was
supposed to get all the updated parts when I bought
the kit but that was not so. I found out that the tail
problem was the inferior old pin in pulley and my leaping
into the air was due to the old flybar support was broken.
Both parts that were updated. MAN what a way to learn!!!!
Also the tail spinning and my suspected gyro problem
was due to the tail pin slipping. The snapping of the tail
rotors was due to the fly bar support being broken!!
OH WELL, I am ONE experienced PROTOS DUDE now!!! |
