RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 380 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
2 pages [ <<    <     1     ( 2 )    >    >> ]469 viewsPOST REPLY
Autography FlightPower . Advantage Hobby . Revolution Models

.
.
Gasser Model RC Helicopters > Flybar whay to long.
 
 
Fixit
Elite Veteran
Location: UK

My Posts This: Topic  Forum

Sounds like the best option is to fit the 700 fly bar on, yes it fits

I only like to fly gassed up
11-08-2009 05:19 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
j.8
Veteran
Location: Denmark

My Posts This: Topic  Forum
Quote 
Well i'm not quiet sue what all that means but from the sound of it is my fly bar is about a foot to long

Quote 
I don't know the part number it just came to me in a longer cardboard box


Like you say, put the Trex 700 flybar on, and shorten the
super long for later use

Bo
11-08-2009 05:48 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
shawmcky
Key Veteran
Location: Isle of Wight,United Kingdom

My Posts This: Topic  Forum		700 flybar

I use the 570mm Align flybar on two JR gassers,Robbe Millenium gasser and old Kalt gasser.You also get two for oneIt transformed the feel of the Robbe.

Team- unbiased opinion,no experts here just trying to help thats all.K.I.S.S principle upheld here
11-08-2009 05:51 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
smallplanes
Key Veteran
Location: Timmonsville,S.C. ,USA

My Posts This: Topic  Forum		Well i took my flybar off my 700 and it fits its about 3inchs longer than the stock but thats a lot better than 10inchs. I just have to line it up a little better and mix up soom gas and i think it will be ready for running. I'm getting very nervous now.

I know some of you don't think the flybar from MA is that long but later i will post a pic up side the stock one. I think it was a defect and they knew they where closing and just put it in a box and sent it to me. I took and rolled it on a piece of glass and it is just as bent as my crashed one. I just want to say MA if you have a defect trash it thats what we do every day of the week. One more think don't send it to a machinist who knows better. I will use Trex flybars from now own.


Thanks Fixit and thanks everyone else that helped

Spectra G 26cc
Jewel
2 Evo 50's
3 Trex 450's
Trex 700
Raptor50
12Z
11-08-2009 05:54 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
smallplanes
Key Veteran
Location: Timmonsville,S.C. ,USA

My Posts This: Topic  Forum		Well i go the gas mixed and the main blades on and it's ready to test fly but i'm getting scared now and i never usually get scared to fly one. I hope it goes well.


Thanks for all the help and support

Spectra G 26cc
Jewel
2 Evo 50's
3 Trex 450's
Trex 700
Raptor50
12Z
11-08-2009 08:02 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
smallplanes
Key Veteran
Location: Timmonsville,S.C. ,USA

My Posts This: Topic  Forum		Well i flew it while ago and let me say it runs a lot better with a lot less vibration than before. Theres only a small ripple in the fuel tank. One thing i cant tell you guys if your using a spartan gyro do NOT set it in normal mode i got out there and everything seemed ok and time it left the ground it pun like a top,i brought it back in and put the computor to it and changed it from normal to reverse and went back out there and tried it aain and it was perfect,it held the nose perfect.I got it back inside looking over everything to make sure nothing is loose. I touched the motor and man it was hot,i set the low endjust like hanson said 1 3/8 on low and 1 1/2 on high with about 5ozs of Lawnboy oil. I could go fom a hover to near power and it did not bog or anything it had a great transition. I know i soundin have but i did a few loops and rolls with it and it did them perfect. Does anyone have any better needle settings for break in i'm using Coleman fuel?


Thanks for all the help

Spectra G 26cc
Jewel
2 Evo 50's
3 Trex 450's
Trex 700
Raptor50
12Z
11-08-2009 09:13 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Fixit
Elite Veteran
Location: UK

My Posts This: Topic  Forum		Do a full pre flight check at the field even though you’ve just built it, only put enough fuel in for a sort flight then double check you pitch and throttle curves and have you favourite tipple at the ready.
All the Best
Fixit
Edit
Well I was a bit late with this as I see you have allready flown the bird.

I only like to fly gassed up
11-08-2009 09:17 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
smallplanes
Key Veteran
Location: Timmonsville,S.C. ,USA

My Posts This: Topic  Forum		The only thing i don't understand is when i cranked it it reved pretty high and i had to hurry and lower the trim on the throttle. I had to lowere it so much that the hr cut want cut the motor should i screw in on the throttle linkage to get i back right?


Thanks Fixit

By the way it flew great.

Unless i'm one tooth off on the servo horn?

Spectra G 26cc
Jewel
2 Evo 50's
3 Trex 450's
Trex 700
Raptor50
12Z
11-08-2009 09:24 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
pgkevet
Key Veteran
Location: surrey UK

My Posts This: Topic  Forum		...have you removed the idle screw?

pgk
11-08-2009 09:28 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
smallplanes
Key Veteran
Location: Timmonsville,S.C. ,USA

My Posts This: Topic  Forum		Yes idle screw is out. I don't understand before i had it worked on it would shut it down with no problem but now it won't. I guess i'm going to take the breather of and adjust the rod.


Thanks for the info

Spectra G 26cc
Jewel
2 Evo 50's
3 Trex 450's
Trex 700
Raptor50
12Z
11-08-2009 10:20 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
pgkevet
Key Veteran
Location: surrey UK

My Posts This: Topic  Forum		..when you're adjusting it do so with the air filter off...so you can see if the butterfly closes fully...Oh, and double check for any air leaks around your gaskets

pgk
11-08-2009 11:05 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
rbort
Elite Veteran
Location: Franklin, MA - U.S.A.

My Posts This: Topic  Forum		On the flybar business

Didn't it come with a package labeled X-cell with a part number on it?

What does your receipt say on it, that should have the part number as well...

I can only assume you either ordered the wrong number or they sent you the wrong number - check the receipt and you'll know. Its supposed to be 0566-1 for future reference.

Glad to hear you're up and running with the Spectra, you should be 10 times better off now with a smooth motor on-board.

-=>Raja.

1005 Gasser, G26 3DMax++, 2205+ flights
Spectra-g, G26 3DMax, 870+ flights
11-09-2009 05:41 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
smallplanes
Key Veteran
Location: Timmonsville,S.C. ,USA

My Posts This: Topic  Forum		Well i put my foot in my mouth again,i came home for lunch and set down at my computor and happened to look over against the wall and i saw a X Cell tag hanging out i picked it up and looked and that was it.It had the PN#MA0566-1 on it and it the same length as my bent one. I looked this room up and down last night and could not find it so i found the other one and i thought that was it but that one was for my Bat. I'm sorry MA you did send the right part it's my dumb rump that misplaced it. Sorry for post a dumb question. Now i can put my Trex flybar back on.


Thanks for all the input,and my bad
Ivan

Spectra G 26cc
Jewel
2 Evo 50's
3 Trex 450's
Trex 700
Raptor50
12Z
11-09-2009 05:33 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
rbort
Elite Veteran
Location: Franklin, MA - U.S.A.

My Posts This: Topic  Forum		Ah...!!

I've never seen a flybar from Minair so long before, but I thought I just never came across it. Makes more sense now that its a quickbat flybar...

Well glad that got sorted out, and go out and enjoy that Spectra now!

-=>Raja.

1005 Gasser, G26 3DMax++, 2205+ flights
Spectra-g, G26 3DMax, 870+ flights
11-10-2009 05:00 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
2 pages [ <<    <     1     ( 2 )    >    >> ]469 viewsPOST REPLY
CarbonXtreme . Midland Helicopters . HeliProz

.
.
Gasser Model RC Helicopters > Flybar whay to long.
 
 
smallplanes
Key Veteran
Location: Timmonsville,S.C. ,USA

My Posts This: Topic  Forum		Well you know me run my mouth first then find out later i was wrong,but i will tell you if i'm wrong. Thanks Raja




Thanks guys

Spectra G 26cc
Jewel
2 Evo 50's
3 Trex 450's
Trex 700
Raptor50
12Z
11-10-2009 11:40 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
2 pages [ <<    <     1     ( 2 )    >    >> ]469 viewsPOST REPLY
Autography FlightPower . Advantage Hobby . Revolution Models

.
.
Gasser Model RC Helicopters > Flybar whay to long.
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 8:13 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF