RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 568 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page353 viewsPOST REPLY
E-flite . Fast Lad Performance . Ace Hobby

.
.
e-Mikado Logo 400 500 600 > New Jive 120 - problem?
 
 
Furyous
Senior Heliman
Location: Detroit, Michigan

My Posts This: Topic  Forum		OK, I'm not new to Jive escs, I have 43 others, but I am stumped here.

I just got a brand new Jive 120 HV from Readyheli and I cannot get it to go into program mode. It is as if the jumper does not exist. It merely initializes like it has been programmed already. I am afraid to try it., because I don't know what mode it is set to.


Any ideas.

Team Xero G, Team Beam, Team Flightpower, Team G-Force
11-06-2009 02:50 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
TomC
Veteran
Location: Gold Coast, Queensland, Australia

My Posts This: Topic  Forum		Maybe check the jumper is ok and/or try another one from one of your other escs. You could also try using the Kontronik progaming cards. Good luck sorting this problem out.

Cheers,
TomC

CX2 2s
Logo10- 3D 5s
Trex600 10s HC-Rigid
2x Ion-x, 1x15s DS, 1x10s SS
11-06-2009 03:36 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

My Posts This: Topic  Forum		silly Q, since there are 3 pins there, moved it side to side between two parralels? one side beeps, other doesen't

It definetely needs to beep, sometimes certain motors need a spin before plugging in as well as they are silent if in between cogs..

...Once upon a time there were Nitros, flybars and frequency pins...
11-06-2009 03:47 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
NTM
Senior Heliman
Location: Lloydminster, Alberta, Canada

My Posts This: Topic  Forum		You are putting the jumper on, powering the esc, and then pulling the jumper off to go into programming mode, right ?

Regards,
Nathan
11-06-2009 04:07 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Furyous
Senior Heliman
Location: Detroit, Michigan

My Posts This: Topic  Forum		I tried 3 different jumpers, both combination of pins and yes, I am installing jumper, then powering esc. This sucks. It must be defective. I already installed bullet connectors, deans and heatsink.

Team Xero G, Team Beam, Team Flightpower, Team G-Force
11-06-2009 04:54 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
NTM
Senior Heliman
Location: Lloydminster, Alberta, Canada

My Posts This: Topic  Forum		Just to be clear, you are pulling the jumper off while the esc is powered up ?
11-06-2009 05:15 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

My Posts This: Topic  Forum		Also what motor are you connecting to? Do you have an alternative motor to hang off side connected just to see if you can hear beeps? If all of this shows no success, I suggest calling ReadyHeli and get this cleared up for sure.

...Once upon a time there were Nitros, flybars and frequency pins...
11-06-2009 06:07 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
helicraze
Elite Veteran
Location: Victoria - Australia

My Posts This: Topic  Forum		You sure you not sticking it into the extra BEC port?
11-06-2009 10:35 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Furyous
Senior Heliman
Location: Detroit, Michigan

My Posts This: Topic  Forum		I have 4 Jive escs. I promise you that I know what I am doing. I have never had a problem like this before.

It initializes and functions just like there is no jumper installed. I even checked motor direction by slightly raising throttle. It is not recognizing the jumper for programming mode.

I am sending it back to Readyheli.

The only reason I questioned it is because it is version 7, and I thought things might be different, but the manual is same as the version 6 I already have.

Team Xero G, Team Beam, Team Flightpower, Team G-Force
11-06-2009 12:38 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Jesse Kavros
Senior Heliman
Location: San Jose, California

My Posts This: Topic  Forum		I just got a version 7 Jive 120 and it went into program mode fine. so yeah i would suggest sending it in.
11-06-2009 02:51 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
Furyous
Senior Heliman
Location: Detroit, Michigan

My Posts This: Topic  Forum		Wow! It is working fine. I wasn't pulling jumper off soon enough.

Now, it's time to go fly . . .

Team Xero G, Team Beam, Team Flightpower, Team G-Force
11-06-2009 04:50 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

My Posts This: Topic  Forum		LOL great, have fun and let us know how it works for you, you're running mode 11?

...Once upon a time there were Nitros, flybars and frequency pins...
11-06-2009 07:50 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Furyous
Senior Heliman
Location: Detroit, Michigan

My Posts This: Topic  Forum		Yes, mode 11 on both 120 HVs.

Team Xero G, Team Beam, Team Flightpower, Team G-Force
11-06-2009 08:52 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
helicraze
Elite Veteran
Location: Victoria - Australia

My Posts This: Topic  Forum		Can anyone describe the sypmtoms of the starting problem of V6? I have a heli on its way with V6 soft, just wondering if its a big problem?
11-08-2009 11:55 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
dahld
Senior Heliman
Location: Bakersfield, CA, USA

My Posts This: Topic  Forum		helicraze,

What motor are you going to run? We have a mix of version 6 and version 7's, and have never had the issue appear with the Scorp 4035's we run them with.

Dave

Kyle Dahl (16)
Sponsored by:
Mikado
Thunder Power
Kontronik
Scorpion
Egde Blades
11-09-2009 01:09 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
helicraze
Elite Veteran
Location: Victoria - Australia

My Posts This: Topic  Forum		Pyro 30-12.

I asked the bloke i am getting it off and he said 2 times when it first spooled up it was not abrupt but sorta rough or something. He said he would hit hold and re spool and it was fine.

Just wondering if the above is the sypmtom of the problem for V6?
11-09-2009 01:28 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
TomC
Veteran
Location: Gold Coast, Queensland, Australia

My Posts This: Topic  Forum		Don't know if it's relevent but my Powerjazz escs (the big one) fails to startup every once in a while (maybe 5-10% of the time). It starts to spool up and then quits. I just hit throttle hold and flick it back and it then seems to startup fine.

If I remember to pre-spin the blades, this never happens. Also, this minor problem only happens with my Actro 32-3 and 32-4 motors. I'm not sure what causes this to happen though.

Cheers,
TomC

CX2 2s
Logo10- 3D 5s
Trex600 10s HC-Rigid
2x Ion-x, 1x15s DS, 1x10s SS
11-09-2009 02:21 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

My Posts This: Topic  Forum		Nope thats not a symptom of any version really..

Maybe this "bloke" had it in ariplane mode or something as the Jives, Jazzes are anything but abrupt really...

...Once upon a time there were Nitros, flybars and frequency pins...
11-09-2009 02:21 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
stanc
Key Veteran
Location: Conroe, TX

My Posts This: Topic  Forum		Tom, I think what you described mostly happens on higher kV motors. My Logo with a 1100 tried not to start spooling up just about ever time. The 890 that is in it now with the HV85 never hesitates to spool up.
My 32-3s on HV85 and HV110 never do that.
Must just be the Kontroniks.

Stan
Logo 500
Ion X2
eStratus
eAvro90
11-09-2009 02:41 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page353 viewsPOST REPLY
Esprit Model . Thunder Power RC . Mikado Modellhubschrauber

.
.
e-Mikado Logo 400 500 600 > New Jive 120 - problem?
 
 
helicraze
Elite Veteran
Location: Victoria - Australia

My Posts This: Topic  Forum		The reason for V6-7 so quickly was due to startup issue, even Mike told me this, just trying to determine what motors it was applicable and what the syptoms are.
11-09-2009 04:43 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page353 viewsPOST REPLY
E-flite . Fast Lad Performance . Ace Hobby

.
.
e-Mikado Logo 400 500 600 > New Jive 120 - problem?
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 5:58 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF