RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 832 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page153 viewsPOST REPLY
HeliProz . Ron’s HeliProz South . MTA Hobbies

.
.
Radio - JR & Spektrum DSM > AR7100 Switch not working with Vbar attached??
 
 
ryblack04
Heliman
Location: Jacksonville, Florida

My Posts This: Topic  Forum		--------------------------------------------------------------------------------

Hello,

Here is my issue... My AR7100 has been working great and I have been using the toggle switch supplied with the kit.

Since adding the Vbar unit I have a wierd issue... With the switch in the off position and lipo plugged in the 7100 it stays off like it should. I turn it on and the unit powers up like it should and everything works fine.

When I flip the switch to the off position the 7100 does not turn off. The blue light stays on and the cyclic servos stay on. I have to unplug the lipo in order to cut the power.

With lipo unplugged I make sure switch is off and I can plug lipo back in and it all stays off...

Any thoughts??? Seems like if the switch was bad it would not work at all?

Thanks for any help.

Blessed is the man who perseveres under trial. James 1:12
11-05-2009 04:46 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
VooDooX
Key Veteran
Location: San Francisco Bay Area CA, US (San Mateo)

My Posts This: Topic  Forum		maybe its some sort of saftey feature? when the 7100 has a servo signal it stays on? try this disconnect vbar but plug in 1 servo then move the stick so that servo moves.. then Don't center the stick and switch off the switch see what happens reason i ask this is vbars always sending a servo signal whether your moving the servos or not

99.9999999999999% of an atom is empty space
11-05-2009 05:02 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Futura SE
Veteran
Location: Fayetteville, Arkansas

My Posts This: Topic  Forum		Normal. Mikado makes a wiring harness just for the 7100 RX. Go to ReadyHeli. Problem solved. The 7100 as you know is not wired like other RX's and that is what is causing your problem.
11-05-2009 06:04 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
ryblack04
Heliman
Location: Jacksonville, Florida

My Posts This: Topic  Forum		Ok, need some help here.. Do you have a link for this wiring harness? I am not finding one that would fit with what you are saying.

Thanks!

Blessed is the man who perseveres under trial. James 1:12
11-05-2009 07:07 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
trickytiker
Senior Heliman
Location: england

My Posts This: Topic  Forum		are you using a multigov

i have problems with spelling
11-05-2009 08:17 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
ryblack04
Heliman
Location: Jacksonville, Florida

My Posts This: Topic  Forum		No, still using it...

Blessed is the man who perseveres under trial. James 1:12
11-05-2009 08:28 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
trickytiker
Senior Heliman
Location: england

My Posts This: Topic  Forum		i have had the same its feed back probably from the vbar unit
i think it was the throttle unplug the throttle and try it

i have problems with spelling
11-05-2009 08:33 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
beeflyer2
Elite Veteran
Location: Woodstock, GA - USA

My Posts This: Topic  Forum
Quote 
Don't center the stick and switch off the switch see what happens reason i ask this is vbars always sending a servo signal whether your moving the servos or not

The receiver is also constantly sending servo signals. Neutral is a signal!
11-05-2009 08:38 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
VooDooX
Key Veteran
Location: San Francisco Bay Area CA, US (San Mateo)

My Posts This: Topic  Forum		well i meant a non neutral signal!!!

99.9999999999999% of an atom is empty space
11-05-2009 08:43 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
ryblack04
Heliman
Location: Jacksonville, Florida

My Posts This: Topic  Forum		Found the harness

http://vstabi.de/user_wiki/index.ph...d_5V_tail_servo

This should fix my problems

Blessed is the man who perseveres under trial. James 1:12
11-05-2009 09:46 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
ryblack04
Heliman
Location: Jacksonville, Florida

My Posts This: Topic  Forum		The harness worked!

Thanks everyone!!!!!

Blessed is the man who perseveres under trial. James 1:12
11-06-2009 09:55 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
1 page153 viewsPOST REPLY
Model Rectifier Corp . ReadyHeli . Power Helis

.
.
Radio - JR & Spektrum DSM > AR7100 Switch not working with Vbar attached??
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 5:29 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF