RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 888 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page143 viewsPOST REPLY
Power Helis . CANOMOD . Experience RC

.
.
ElyQ Vision 50 > Doh :( starter shaft is stuck in the clutch bearing
 
 
CallumHeliman - Location: Blaby, Leicester, England - My Posts This: Topic  Forum
I get the feeling some damned unknown force is trying to stop me from flying my new heli!

Was dropping my engine ready for when the new bearing block arrives and noticed engine wouldent budge from the shaft, turns out its stuck.. i managed to remove the whole assembly, but i have no clue as to how to remove the shaft from the clutch sprag bearing (one way bearing).... here are some pics:








-Regards
Callum

ElyQ Rock! - Vision 50v2 - Vision 50 Competition
11-04-2009 02:41 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
Callum
Heliman
Location: Blaby, Leicester, England

My Posts This: Topic  Forum		Ah no worries.


I eventually cut the shaft in half as it budge at all




ElyQ Rock! - Vision 50v2 - Vision 50 Competition
11-04-2009 04:00 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
oragami
Senior Heliman
Location: Florida

My Posts This: Topic  Forum		This is a first.

I think that this might have happened because the clutch stack wasnt in line and when you cranked it, it may have sort of wedged itself into the bearing. Or the driver could have had a Burr on it. Not sure what the problem was, but I hope to see you get this Bird in the Air soon.

Thanks

Craig
11-05-2009 01:40 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page143 viewsPOST REPLY
Heli-Max . Hobby Hut . Heli Wholesaler

.
.
ElyQ Vision 50 > Doh :( starter shaft is stuck in the clutch bearing
 Print TOPIC Advertisers 

Subscribe to This Topic

Tuesday, November 24 - 2:57 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF