RR Rated M For Mature
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 413 ONLINE 18 EVENTS SEARCH REGISTER  START HERE
 
1 page179 viewsPOST REPLY
MTA Hobbies . Model Rectifier Corp . ReadyHeli

.
.
Thunder Tiger Raptors 30-90 - Imperio > RAPTOR 50 titan SE bearing question
 
 
johnbs8
Senior Heliman
Location: roseville michigan

My Posts This: Topic  Forum		the se uses a new added bearing in the clutch bell sytem. i have the raptor 50V2 and am installing this bearing while i have the frames split. my question is why are there flat spots on the bearing block of this new bearing? part number PV0669. seems as if maybe its supposed to be sandwhiched in the frames. is there a diff in the se frame or are they still using the same frame and the flat spots are for ****s n giggles? Thanks John

Raptor 50V2 coverted to Titan SE, OS 50 hyper,MP5 SB pipe, align gov. GY520 gyro
11-04-2009 05:17 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Heli 770
rrProfessor
Location: Lemon Grove, Ca. USA.

My Posts This: Topic  Forum		The flat spots are for tightening the support into the pinion gear. The support and pinion are threaded.
11-04-2009 05:27 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
johnbs8
Senior Heliman
Location: roseville michigan

My Posts This: Topic  Forum		ok thought it was there for something. i needf the new pinion then. Thanks alot John

Raptor 50V2 coverted to Titan SE, OS 50 hyper,MP5 SB pipe, align gov. GY520 gyro
11-04-2009 04:11 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
S Bell
Senior Heliman
Location: Nova Scotia Canada

My Posts This: Topic  Forum
Quote 
i needf the new pinion then

And possibly a clutch bell.

Raptors are everywhere
11-04-2009 06:53 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
johnbs8
Senior Heliman
Location: roseville michigan

My Posts This: Topic  Forum		yah i replaced both today. pinion and clutch bell. also saw that the washer that goes inbetween the eclip and the clutch bell bearing was missing. Not any more

Raptor 50V2 coverted to Titan SE, OS 50 hyper,MP5 SB pipe, align gov. GY520 gyro
11-04-2009 06:57 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
johnbs8
Senior Heliman
Location: roseville michigan

My Posts This: Topic  Forum		im having trouble with the direction that the pinion mounts into the clutch bell. when i get the clutch bell all assembled and put it into the frame, theres not enuff flat spot showing on the starter shaft for the coupler screws to tighten against. i put the E-clip on the shaft,then the spacer, then pinion,bearing and new bearing(the new se bearing) onto the Cbell and slide the shaft threw. am i doing this right?? lol whats jacking me up here??? Thanks John

Raptor 50V2 coverted to Titan SE, OS 50 hyper,MP5 SB pipe, align gov. GY520 gyro
11-04-2009 08:49 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Heli 770
rrProfessor
Location: Lemon Grove, Ca. USA.

My Posts This: Topic  Forum		After the spacer than the clutch bell.
11-04-2009 09:09 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
S Bell
Senior Heliman
Location: Nova Scotia Canada

My Posts This: Topic  Forum		Are the pinion teeth seated onto the aluminun bell or is there a space? Also the pinion end with the smooth shoulder goes into the bell. The bell should have a shoulder too.

Raptors are everywhere
11-04-2009 09:17 PM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   HOMEPAGE   GALLERY
 
 
johnbs8
Senior Heliman
Location: roseville michigan

My Posts This: Topic  Forum		ok i figured it out. i was given the Titan clutch bell and not the se bell. theres a hight diff. glad i got over that hump lol thanks for the help fellas

Raptor 50V2 coverted to Titan SE, OS 50 hyper,MP5 SB pipe, align gov. GY520 gyro
11-05-2009 01:20 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE   GALLERY
 
 
Damper
Senior Heliman
Location: Point Blank TX USA

My Posts This: Topic  Forum		Wow I did not know there was a difference between Titan and the SE version clutch bell thx for sharing.

Full Throttle Spooning Leads To Forking
11-05-2009 02:56 AM
PROFILE   PM   EMAIL   POSTS   BUDDY   IGNORE  
 
 
1 page179 viewsPOST REPLY
Power Helis . CANOMOD . Experience RC

.
.
Thunder Tiger Raptors 30-90 - Imperio > RAPTOR 50 titan SE bearing question
 Print TOPIC Advertisers 

Subscribe to This Topic

Monday, November 23 - 7:14 am - Copyright © 2000 - 2009 runryder.com | email | link to rr | START HERE | NF