jschenck
Elite Veteran
Location: La Vista, NE.
My Posts This: Topic Forum | get a sheet of wet/dry sandpaper 220 grit should work. Lay it down on something very flat like a sheet of glass. carefully sand the muffler port until it's flat, sanding marks are even across the whole face. Clean it all up and remount it. You can also use a bit of RTV sealant here but use a VERY small amount, like almost none. you don't want any of that getting inside the muffler port as it'll get sucked inside your engine and foul the glow plug. Shouldn't need the RTV but some do this.
.. P-gas, T700, V50c/u, R50T, T4/250 and a Cricket .. |
