kennethw
Senior Heliman
Location: Singapore
My Posts This: Topic Forum | The GyroBot 900 is 32.04mm wide, 32.08mm long and 16.58mm tall.
It did not fit between the frame of the Beam. What I had to do is build a platform using very very thin Carbon Fibre sheet and double sided tape to raise Receiver Platform so it is flush with the side frame. Then I mounted the GyroBot between the back post and middle post, so the GyroBot overhung on either side of the internal space, but did not hang out of the outer width of the frame.
The Beam internal width is 30.40 and over width is 33.83mm.
Although the height is only 16.58mm, there is require double that to allow for wiring.
Hope this makes sense.
Ken |
